Instruction for Use

AUTOMATIC OVEN CLEANING

For the description of this function, see the chapter CLEANING and the functions table at page 7.

To activate the oven's automatic cleaning cycle (pyro-cleaning), proceed as follows:

1. Turn the "Functions" knob to symbol : the word PYRO appears on the display.

2. Press button to confirm your choice and start the pyro-cleaning cycle.

To select ECO pyro-cleaning, turn the "Browse" knob: the word ECO appears bottom right on the display.

Press button to start the shorter programme.

During pyro-cleaning, the oven door is automatically locked and the symbol appears on the display.

The door remains locked at the end of the cleaning cycle: "COOL" appears on the display, indicating the

oven is still cooling down. When the oven cools to a safe temperature, the symbol switches off and

the display shows "END".

KEY-LOCK

This function can be used to lock the buttons and knobs on the control panel.

To activate it, press and at the same time for at least 3 seconds. When activated, the functions

associated with the buttons are locked and the display shows a key symbol. This function can also be

activated during cooking. To deactivate it, repeat the above procedure. When the key-lock function is

activated, the oven can be switched off by turning the knob to 0 (zero). In this case, however, the

previously selected function will have to be set again.

Instructions for oven use