Owner's Manual

6
Daily Use
1. SELECT A FUNCTION
■ To switch on the oven, press or touch anywhere on the
screen.
The display allows you to choose between Manual and Assisted
Cooking.
■ Tap the main function you require to access the corresponding
menu.
■ Scroll up or down to explore the list.
■ Select the function you require by tapping it.
2. SET MANUAL FUNCTIONS
After having selected the function you require, you can change its
settings. The display will show the settings that can be changed.
TEMPERATURE / BROIL LEVEL
■ Scroll through the suggested values and select the one you
require.
If allowed by the function, you can tap to enable/disable
preheating.
■ To start setting the duration, tap “Set Cooking Time”.
■ Tap the relevant numbers to set the cooking time you require.
■ To conrm tap “NEXT”.
■ To change the entered cooking duration time, tap on the
displayed cooking timer, edit with the new time and tap
“RESUME”.
■ To cancel a set cooking duration time, tap the duration and
then select “STOP”.
3. SET START / END TIME DELAY
You can delay cooking before starting a function: The function will
start or end at the time you select in advance.
■ Tap “DELAY” to set the start time or end time you require.
■ Once you have set the required delay, tap “START DELAY” to
start the waiting time.
■ Place the food in the oven and close the door: The function
will start automatically after the period of time that has been
calculated.
Programming a delayed cooking start time will disable the oven
preheating phase: The oven will reach the required temperature
gradually, meaning that cooking times will be slightly longer than
those listed in the cooking table.
■ To activate the function immediately and cancel the
programmed delay time, tap .
4. START THE FUNCTION
■ Once you have congured the settings, tap “START” to
activate the function.
You can change the values that have been set at any time during
cooking by tapping the value you want to amend.
If the oven is hot and the function requires a specic maximum
temperature, a message will be shown on the display.
■ Press to stop the active function at any time.
Convect Bake
STARTDELAY
The cavity needs to be
preheated before inserting the
food. The oven will notify you
PREHEAT NEEDED: