Product sheet
Quick Start Guide Connect the appliance to the water supply and power supply (see Installation manual). Read the user handbook carefully before using the appliance. 훽 훾 ڹ 훿 FREEZER COMPARTMENT P. Automatic ice maker Q. Inside light R. Glass shelves S. Drawer T. Drawer U. Ice bucket V. Door trays REFRIGERATOR COMPARTMENT A. Inside light B. Shelves C. Shelf - drawer lid D. Snack drawer (depending on the model) E. Crisper drawer F.
- Sensor (Sensor Function) This activates automatically to signal that the appliance is working to reach optimal storage conditions. - Water filter The colour of the symbol indicates the condition of the filter. Green: new filter Blue: filter in good condition Red (fixed): filter running out Red (blinking): filter needs replacing. After replacing the filter, press the "Reset filter/alarm" button until the symbol becomes green.
- Child Lock (Child Safety) To lock/unlock the buttons on the control panel and the water/ice dispenser, press the "Reset filter/alarm" and "Vacation mode" buttons at the same time until the symbol is displayed and the acoustic signal sounds. - Filter Alarm Reset (Acoustic alarm mute button) Press the "Reset Filter/Alarm" button to stop the acoustic alarm. - Malfunction Alarm See section "What to do if...". - Blackout Alarm See section "What to do if...". - Eco Mode This function enables you to save energy.
What to do if… Possible causes Solutions Before contacting the After-sales Service, try to solve the problem by following the advice below. The appliance is excessively noisy Noises from appliances are normal since the fans and compressors for controlling its operation switch on and off automatically, for example: • hissing when the appliance is switched on the first time or after a long period. • gurgling when the refrigerant enters the pipes. • humming when the water valve or fan are activated.
What to do if… Possible causes Solutions It is not cold enough inside the compartments There could be various causes Check that: • the doors close properly. • the appliance is not near a heat source. • the air ducts inside the compartments are not blocked, as this prevents the circulation of cold air. • the "Vacation mode" function is not enabled (see Quick Start Guide) If necessary, lower the temperature. The area in contact with the seal is hot.
What to do if… Possible causes Solutions Blackout Alarm. This alarm activates when there has been an extended power failure causing the freezer compartment temperature to rise. The value flashing on The red Blackout Alarm LED and the the freezer display is the highest temperature reached during the power freezer temperature display failure. are blinking, and the acoustic signal is sounding (if provided). Press the mute alarm button to switch off the acoustic signal.
What to do if… The dispenser does not dispense ice when the lever is pressed. Possible causes Solutions This is normal when the freezer door is open, or if the ice bucket is not installed correctly. Close the freezer door and/or check that the ice bucket is installed correctly. The "Child Safety" or "Ice/water dispenser lock" function may have been enabled. Disable the function (see the Quick Start Guide).
Printed in Italy 06/10 5019 715 01002 n GB
