manual

The wine drawer is designed for built-in installation and must not be used as a free-standing unit.
Installation and maintenance must be carried out by at least two qualified technicians.
INSTALL THE WINE DRAWER ONLY IN POSITION UNDER THE KITCHEN WORKTOP.
Make sure the wine drawer is fixed to the adjacent cabinet with the brackets supplied.
DO NOT INSTALL THE WINE DRAWER IN A COLUMN.
DO NOT INSTALL THE WINE DRAWER ON ITS OWN OR IN A SINGLE CABINET.
Otherwise the wine drawer will be unstable, with risk of tipping over and consequent injury or damage.
Do not start this electrical appliance if it is damaged, does not work properly, is partially disassembled or if
there are broken or missing components, including damaged cable or power socket.
Make sure the power cable is in a position where it cannot be trodden on, tripped over, damaged or
undergo strain.
Do not install or store the appliance in places where it can be exposed to bad weather or temperatures
below freezing.
The min. area in the base board for the passage of air must be at least 200 cm2.
Installation kit supplied
4
5019_102_00270_INSTAL_GB 6-11-2007 10:45 Pagina 4