KSB1575 INSTRUCTIONS INSTRUCTIONS INSTRUCCIONES W10514184A_ENv3.
B Welcome to the world of KitchenAid ®. We’re committed to helping you create a lifetime of delicious meals for family and friends. To help ensure the longevity and performance of your appliance, keep this guide handy. It will empower you with the best way to use and care for your product. Your satisfaction is our #1 goal. Remember to register your product online at www.kitchenaid.com or by mail using the attached Product Registration Card. P Join us in the kitchen at www.kitchenaid.com.
BLENDER INSTRUCTIONS blender SAFETY Important safeguards........................................................................................... 4 Electrical requirements....................................................................................... 5 English Table of Contents PARTS AND FEATURES Parts and accessories........................................................................................... 6 Assembling the blender Preparing the Blender for use..........................
BLender Safety B IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. To protect against risk of electrical shock, do not put Blender in water or other liquid. 3. Close supervision is necessary when any appliance is used by or near children. 4. Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning. 5. Avoid contact with moving parts. 6.
12. The use of attachments, including canning jars, not recommended by KitchenAid may cause a risk of injury to persons. 13. When blending hot liquids, remove center piece of two-piece cover. 14. Flashing light indicates ready to operate - avoid any contact with blades or moveable parts. 15. This product is designed for household use only. SAVE THESE INSTRUCTIONS English Blender Safety Electrical requirements Voltage: 120 Volts A.C.
Parts and Features A Parts and accessories Lid with ingredient cup BPA Free pitcher Stainless steel blade Speed selection buttons Clean touch control pad Die-cast metal base Assembling the blender Preparing the Blender for use Before First Use Before using your Blender for the first time, wipe Blender base with a warm damp cloth, then wipe clean with a damp cloth. Dry with a soft cloth. Wash pitcher, lid, and ingredient cup in warm, sudsy water (see “Care and Cleaning” section).
English Assembling the blender 2 Rotate pitcher clockwise, approximately 1/8 turn until pitcher clicks into place. 4 Put lid on pitcher. 3 Adjust the length of the Blender power cord. 6 Before removing the pitcher from the base, always press POWER to stop the flashing lights and unplug the power cord. NOTE: When properly positioned, pitcher will rest completely on Blender base. If not, repeat steps 1 and 2. 5 Before using the Blender, plug into a grounded 3-prong outlet, and press POWER.
OPERATING the blender operatin Using the Blender Before Use While the Blender Power indicator light or the PULSE mode indicator light is blinking: - Do not interfere with blade movement. - Do not remove pitcher lid. Before operating the Blender, make sure the pitcher is properly locked onto the Blender base. The Blender has five speeds: STIR, CHOP, MIX, PUREE, and LIQUIFY. It also features CRUSH ICE and PULSE modes. 1 Put ingredients in pitcher and firmly place lid. 2 Press POWER.
operating the blender Your Blender offers a CRUSH ICE feature. When selected, the Blender will automatically pulse for 30 seconds at staggered intervals at the optimal speed for crushing ice or other ingredients. 1 3 Before operating the Blender, make sure the pitcher is properly positioned on the base. 2 Press POWER, then press CRUSH ICE. The indicator light will stay lit. 4 English Crushing ice Put ingredients into the pitcher and firmly place lid. Use up to 1/2 tray of cubed ice.
operating THE blender operatin Using PULSE mode Your Blender offers a PULSE mode, which allows a “Pulse-at-any-speed” feature. 1 Before operating the Blender, make sure the pitcher is properly positioned on the base. 2 Put ingredients into the pitcher and firmly place lid. 4 Press and hold a speed button for the desired length of time. Both the speed button and PULSE mode indicators will stay lit when pulsing.
operating the blender • The Blender pitcher ingredient cup can be used to measure and add ingredients. Remove cup and add ingredients at STIR, CHOP, or MIX speeds. When operating at higher speeds with a full pitcher or with hot contents, stop the Blender and then add ingredients. IMPORTANT: If blending hot foods or liquids, remove the center ingredient cup, and place a towel over the lid. Operate only on STIR speed. Do not use PULSE with the CRUSH ICE feature, or for hot liquids.
Tips for great results T Quick tips • If you’re making beverages using ice, start with CRUSH ICE, then finish with Speed 5 LIQUIFY in order to produce a smoother texture. • Ice directly from the freezer will crush better than partially melted ice for snow. • Smaller ice cubes can be chopped or crushed faster than large ones. • For many ingredient mixtures, start the blending process at STIR to thoroughly combine the ingredients. Then increase to a higher speed, as desired.
Prepare pancake or waffle batter from mix: Place mix and other ingredients in pitcher. Cover and blend at MIX until well-mixed, 10 to 20 seconds. Stop the Blender and scrape sides of the pitcher as needed. Grate cheese: Cut very cold cheese into 1.5 cm cubes. Place up to 1/2 cup (120 mL) cheese in the pitcher. Cover, and blend at LIQUIFY about 5 to 10 seconds. For hard cheeses, such as Parmesan, bring to room temperature then blend at LIQUIFY for 10 to 15 seconds.
W Troubleshooting IMPORTANT: The Blender will not operate at any speed unless the POWER button is pressed first. Blender does not operate when a setting is selected No indicator lights are lit. Check to see if the Blender is plugged into a grounded 3-prong outlet. If it is, press POWER; then unplug the Blender. Plug it back in to the same outlet, and Press POWER.
Warranty This warranty extends to the purchaser and any succeeding owner for Blender operated in the 50 United States, the District of Columbia, Puerto Rico, and Canada. Length of Warranty: One Year Full Warranty from date of purchase. KitchenAid Will Pay Hassle-Free Replacement of your Blender. for Your Choice of: See the next page for details on how to arrange for service, or call the Customer eXperience Center toll-free at 1-800-541-6390.
Warranty Hassle-Free Replacement Warranty – 50 United States, District of Columbia, and Puerto Rico We’re so confident the quality of our products meets the exacting standards of KitchenAid that, if your Blender should fail within the first year of ownership, KitchenAid will arrange to deliver an identical or comparable replacement to your door free of charge and arrange to have your original Blender returned to us. Your replacement unit will also be covered by our one year limited warranty.
®/™ © 2013 KitchenAid. All rights reserved. Used under license in Canada. ®/™ © 2013 KitchenAid. Tous droits réservés. Utilisé sous licence au Canada. ®/™ © 2013 KitchenAid. Todos los derechos reservados. Usada en Canadá bajo licencia. W10514184A W10514184A_SP.