Installation Instructions

12
For Model KSGB900E:
5. Align the gas tube opening in the burner base with the
orice holder on the cooktop and the igniter electrode
with the notch in the burner base.
6. Place the burner caps on the appropriate burner bases.
IMPORTANT: The bottom of the small and medium caps are
different. Do not put the wrong size burner cap on the burner
base. Each round burner cap is marked with an AUX, SR,
UR, or ST to match with a letter on the burner base.
A. Small (Auxiliary)
B. X-Large (Stack)
C. Oval (OV) D. Medium (Semi Rapid)
E. Large (Ultra Rapid)
A
D
C
EB
A. Burner cap
B. Gas tube opening
C. Burner base
D. Orice holder
E. Igniter electrode
A
B
C
D
E
AUX
SR
ST
UR
7. Plug into a grounded 3 prong outlet.
NOTE: Each round burner base is marked with one of the
following: AUX, SR, UR, ST.
Small cap
(Auxiliary)
Medium cap
(Semi Rapid)
Large cap
(Ultra Rapid)
X-Large cap
(Stack)
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
Install Griddle
Applicable to KSGB900E only.
1. Place the “FRONT” end of the griddle down, facing the oven
door. Verify that the feet are placed onto the grate.
NOTE: The image shown is generic, actual product may look
different.
2. Clean the griddle before using. Refer to the Use and Care
Guide for cleaning instructions. The griddle can be placed
over the left, right, or center burner.
A
B
A. Front
B. Feet
Burner caps should be level when properly positioned. If
burner caps are not properly positioned, surface burners
willnot light. The burner cap should not rock or wobble when
properly aligned.
A
B
A. Incorrect
B. Correct
A
D
EB
C
For Model KSGG700E:
A. Small (Auxiliary)
B. X-Large (Stack)
C. Medium
(Semi Rapid)
D. Medium (Semi Rapid)
E. Large (Ultra Rapid)