K45 Series KSM45–KSM200 Series
PARTS AND FEATURES 3 10 2 4 1 5 11 9 8 6 7 12 13 14 1 Motor Head (locking lever not shown) 8 Bowl** 2 Attachment Knob 9 Beater Shaft 3 Attachment Hub 10 Pouring shield* 4 Motor Head 11 3 L Stainless Steel Bowl* 5 Speed Control Lever 12 Flat Beater 6 Beater Height Adjustment screw (not shown) 13 Flex Edge Beater* 7 Bowl Clamping Plate 14 Wire Whip 15 Dough Hook *Included with select models only. Also available as an optional accessory.
ENGLISH PRODUCT SAFETY IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. To protect against risk of electrical shock, do not put Stand Mixer in water or other liquid. 3.
PRODUCT SAFETY 9. Do not let the cord hang over the edge of table or counter. 10. Remove the beaters, wire whip, or dough hook from the Stand Mixer before washing. SAVE THESE INSTRUCTIONS This product is designed for household use only. ELECTRICAL REQUIREMENTS Voltage: 120 V Frequency: 60 Hz Wattage: 2 75 Watts MAX for models K45, KSM45-KSM80 3 00 Watts MAX for models KSM85-KSM110 3 25 Watts MAX for models KSM120-KSM200 NOTE: The power rating for your Stand Mixer is printed on the serial plate.
Note: The speed control can be set to obtain speeds 1, 3, 5, 7, and 9 if a finer adjustment is required. Do not exceed Speed 2 when preparing yeast doughs as this may cause damage to the Stand Mixer. Speed Stir Accessory Flat Beater (12) Flex Edge Beater* (13) Action Description For starting all mixing procedures, slow stirring, combining, and mashing. Stir 1 2 Flat Beater (12) Flex Edge Beater* (13) Dough Hook (15) 4 For slow mixing, mashing, and faster stirring.
PRODUCT ASSEMBLY 3 4 1 2 Place the bowl on the clamping plate and twist to lock in place. Slide and rotate the accessory aligning over the pin on the shaft. 5 Unlock the motor head and move it down. Then, lock the head to keep it down. Before mixing, test lock by attempting to raise the motor head. (OPTIONAL) To adjust beater to bowl clearance: Tilt and lock the motor head back. Turn the screw slightly counterclockwise (left) to raise the beater, or clockwise (right) to lower it.
ENGLISH PRODUCT USAGE 1 Plug it into a grounded 3 prong outlet. Start with lower speed to avoid splashing and increase it gradually. Refer to the “Speed Control guide”. 2 Do not scrape the bowl while operating. Scraping the bowl once or twice during mixing is usually sufficient. (OPTIONAL): Pour ingredients into the bowl through the pouring chute.
DISASSEMBLING THE PRODUCT 1 Turn the Stand Mixer “OFF/0” and unplug. Unlock and lift the motor head. Then, lock the head to keep it lifted. (OPTIONAL): Lift the front of the pouring shield* clear of the rim of the bowl. Pull away from the Stand Mixer. 2 3 Press the accessory upward, turn it and pull it away from the beater shaft. Twist to unlock the bowl from the clamping plate.
3 4 Insert attachment into attachment hub, making certain that attachment power shaft fits into the square attachment hub socket. Tighten the attachment knob by turning it clockwise until the attachment is secured to the Stand Mixer. ENGLISH OPTIONAL ATTACHMENTS CARE AND CLEANING IMPORTANT: Do not immerse the Stand Mixer body in water or other liquids. 1 2 Unplug and turn the Stand Mixer “OFF/0”.
TROUBLESHOOTING GUIDE WARNING Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. Problem Solution Under heavy loads with extended mixing time periods, you If Stand mixer warms up may not be able to comfortably touch the top of the unit. during use: This is normal. Stop the Stand mixer.
ENGLISH WARRANTY AND SERVICE KITCHENAID STAND MIXER WARRANTY FOR THE 50 UNITED STATES, THE DISTRICT OF COLUMBIA, PUERTO RICO, AND CANADA This warranty extends to the purchaser and any succeeding owner for Stand Mixers operated in the 50 United States, the District of Columbia, Puerto Rico, and Canada. Length of Warranty: One Year Full Warranty from date of purchase. KitchenAid Will Pay for Your Choice of: Hassle-Free Replacement of your Stand Mixer.
WARRANTY AND SERVICE HASSLE-FREE REPLACEMENT WARRANTY—50 UNITED STATES, DISTRICT OF COLUMBIA, AND PUERTO RICO We’re so confident the quality of our products meets the exacting standards of KitchenAid that, if your Stand Mixer should fail within the first year of ownership, KitchenAid will arrange to deliver an identical or comparable replacement to your door free of charge and arrange to have your original Stand Mixer returned to us.
®/™ ©2019 KitchenAid. All rights reserved. KITCHENAID and the design of the stand mixer are trademarks in the U.S. and elsewhere. Used under license in Canada. Tous droits réservés. KitchenAid et la forme du batteur sur socle sont des marques de commerce aux É.-U. et ailleurs. Utilisé sous licence au Canada. Todos los derechos reservados. KITCHENAID y el diseño de la batidora con base son marcas registradas en EE. UU. y en otros países. Usado en Canadá bajo licencia.