USING THE CERAMIC BOWL | 3
USING THE CERAMIC BOWL
ATTACHING THE CERAMIC BOWL TO THE STAND MIXER
Before First Use
Your Stand Mixer is individually adjusted at the factory for optimal performance. When
using the Ceramic Bowl, it may be necessary to readjust the beater-to-bowl clearance.
When correctly positioned, the handle and pour spout should not touch the pedestal
of the Stand Mixer. Please refer to the Stand Mixer Instructions manual for complete
information on adjusting the beater-to-bowl clearance, or call 1-800-541-6390 Monday
through Friday 8-8 EST and we would be happy to assist you in making this adjustment.
IMPORTANT: Before use, wash with hot, soapy water; rinse and dry thoroughly. It is
not necessary to season the Ceramic Bowl before use.
NOTE: This Ceramic Bowl is designed to fit all 4.5 and 5 quart Tilt Head Stand Mixer
models except model KN15E1X. Follow these instructions to attach the Ceramic Bowl
to your Stand Mixer.
Attach the appropriate accessory for
your recipe, using the directions in
the Stand Mixer Instructions manual.
Then place the motor head back in
the down position and lock into place.
Be sure the speed control is set
to 0 (off) and the Stand Mixer is
unplugged. Tilt the motor head back.
Place the Ceramic Bowl on the
clamping plate, and attach by turning
gently in a clockwise direction.