4 | USING THE CERAMIC BOWL
USING THE CERAMIC BOWL
REMOVING THE CERAMIC BOWL FROM THE STAND MIXER
3
Remove the ceramic bowl:
Gently turn the ceramic bowl
counterclockwise to release it from
the bowl clamping plate.
1
Raise the motor head: Check to
be sure that the Stand Mixer is
unplugged, and the speed control is
turned to “0”; then, slide the locking
lever to the unlock position and lift
the motor head.
2
Remove the accessory: Press the
accessory upward as far as possible,
then turn the accessory clockwise
and pull it away from the beater
shaft.
TIPS FOR GREAT RESULTS
The Ceramic Bowl is safe for cooking or
reheating in the microwave.
The Ceramic Bowl is oven safe to
482°F (250°C); however, it is not
recommended to place the Ceramic
Bowl directly under the broiler.
IMPORTANT: To avoid damaging the
Ceramic Bowl, do not use on stovetop
or with any other direct heat, such as
broiler, grill, toaster oven, or direct
flame.
Baking time can vary when using
ceramic bakeware. Monitor and adjust
the cooking time as needed.
Use a hot pad before placing the hot
Ceramic Bowl on an unprotected
surface.
To avoid possible damage, do not set
the hot Ceramic Bowl on a cold or wet
surface. Do not place a frozen Ceramic
Bowl in a hot oven.
After removal from the oven, the
Ceramic Bowl will retain heat longer
than standard bakeware.