Use & Care Guide

CMD + SHIFT CLICK TO CHANGE COPY CMD + SHIFT CLICK TO CHANGE COPY

Attaching the Ceramic Bowl

Before First Use

Your Stand Mixer is individually adjusted at the factory for optimal performance. When

using the Ceramic Bowl, it may be necessary to readjust the beater-to-bowl clearance.

When correctly positioned, the handle and pour spout should not touch the pedestal

of the Stand Mixer.

Please refer to the Stand Mixer “Instructions” manual for complete information on adjusting

the beater-to-bowl clearance, or call 1-800-541-6390 Monday through Friday 8-8 EST and

we would be happy to assist you in making this adjustment.

This Ceramic Bowl is designed to fit all

4.5 and 5 quart Tilt Head Stand Mixer

models except model KN15E1X. Follow

these instructions to attach the Ceramic

Bowl to your Stand Mixer.

USING THE CERAMIC BOWL

IMPORTANT: Before use, wash with hot, soapy water, rinse and dry thoroughly. It is

not necessary to season the Ceramic Bowl before use.

1. Be sure speed control is OFF and Stand

Mixer is unplugged. Tilt the motor head

back.

2. Place the Ceramic Bowl on the clamping

plate, and attach by turning gently in a

clockwise direction.

3. Attach the appropriate accessory for

your recipe, using the directions in the

Stand Mixer “Instructions” manual. Then

place the motor head back in the down

position and lock into place.

Removing the Ceramic Bowl

1. Be sure speed control is OFF and

Stand Mixer is unplugged. Tilt the

motor head back.

2. Remove the accessory from the

Stand Mixer, using the directions in

the Stand Mixer “Instructions” manual.

3. Turn the Ceramic Bowl gently in a

counterclockwise direction to remove

from the Stand Mixer clamping plate.

CARE AND CLEANING

TIPS FOR GREAT RESULTS

W10667002B_FINAL3.indd 4 8/12/14 1:37 PM