Use & Care Guide

6 | USING THE STAND MIXER ATTACHMENT

Place a large bowl under the Fresh

Prep Slicer/Shredder attachment to

catch food as it comes out.

Cut food so that it fits within the

feed tube.

Turn the Stand Mixer to Speed 4,

then use the appropriate food

pusher to feed the food item

into the feed tube.

Push down on the release lever and

pull out the blade, in order to change

to a new blade.

USING THE FRESH PREP SLICER/SHREDDER ATTACHMENT

USING THE STAND MIXER ATTACHMENT

NOTE: For best results, feed only one item at a time into the feed tube (ex. carrot).

Do not feed items into the feed tube by hand; always use the food pushers. If food

remains in the Fresh Prep Slicer/Shredder attachment after running, turn the Stand Mixer

to “0” (Off), remove the remaining items, and place back into the feed tube to shred

or slice again.

W10916597A_ENv15.indd 6 11/4/16 12:08 PM