Installation guide

Dimensions for
routing panel
edges
Side view
3/4"
(19 mm)
min.
1/4"
(6 mm) max.
panel
End view of handle side of panel
panel
handle
2" (5 cm)
min.
1/4" (6mm )max.
Custom panels
more than 1/4"
(6 mm) thick:
Route entire length
or selected areas of
handle side of
panels 3-1/4"
(8.25 cm).
Thickness:
1/2" (12 mm)
minimum to
prevent warping.
Width and height:
depend on
installation type.
Notches for toe
panel recess
(if desired).
Determine
installation height
before cutting
notches.
If side panel will be installed inside
side trim and the side panel is more
than 1/4" (6 mm) thick, route front
edge of panel to fit trim piece.
side panel
support nailer
side trim piece
Page 6
End view of side trim piece
5/32"
(4 mm)
1/4"
(6 mm)
1/16"
(1.5 mm)
7/32"
(5.5 mm)
13/32" (10 mm)
side panel inside
side trim piece
3. Side panels
recessed side panel
outside side trim piece
3-1/4"
(8.25 cm)
min.
A
B
C
Model
A
B
C
36"
(91 cm)
36"
(91 cm)
35-1/2"
(90 cm)
35"
(89 cm)
42"
(106 cm)
42"
(106 cm)
41-1/2"
(105 cm)
41"
(104 cm)
48"
(122 cm)
48"
(122 cm)
47-1/2"
(120 cm)
47"
(119 cm)
25"
(63.5 cm)
24-1/8"
(61.3 cm)
23-1/2"
(59.7 cm)
Panel models
Attach support
board with screw
or adhesive
compatible with
aluminum and
wood.
support
board
door
side panel outside
side trim piece
door
door
support
board
Rout front edge of support board or attach
1/4" board for retention in cabinet side trim.