Dimension Guide

PRODUCT MODEL NUMBERS
OPENING DIMENSIONS
Double Refrigerator Drawers Refrigerator/
Freezer Drawers Double Freezer Drawers
KUDR204E KUDF204E
Electrical: A 115 volt, 60 Hz., AC only,
15- or 20-amp fused, grounded electrical
supply is required. It is recommended that
a separate circuit serving only your
refrigerator drawers be provided. Use
an outlet that cannot be turned off by a
switch. Do not use an extension cord.
IMPORTANT: If this product is connected
to a GFCI (Ground Fault Circuit
Interrupter) equipped outlet, nuisance
tripping of the power supply may occur,
resulting in loss of cooling. Food quality
and flavor may be affected. If nuisance
tripping has occurred, and if the condition
of the food appears poor, dispose of it.
Location:
■ For the refrigerator drawers to be flush
with the front of the base cabinets,
remove any baseboards or moldings
from the rear of the opening.
■ It is recommended that you do not
install the refrigerator drawers near an
oven, radiator, or other heat source.
■ Do not install in a location where the
temperature will fall
below 55°F (13°C).
¹⁄₂"
(1.3 cm)
A
14³⁄₄"
(37.5 cm)
24"
(60.96 cm)
min.
24" (60.96 cm) min.
34³⁄₈" (87.3 cm) min.
35" (88.9 cm) max.
B
A. Utility opening
B. Minimum opening width
■
Height dimensions are shown with the leveling legs extended to the minimum height of Z\v" (6.35 mm)
below the refrigerator drawers.
NOTE: When leveling legs are fully extended to 1" (25 mm) below the refrigerator drawers,
add C\v" (19.05 mm) to the height dimensions.
■ If the floor of the opening is not level with the kitchen floor, shim the opening to make it level with the
kitchen floor.
PRODUCT DIMENSIONS
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. W10741575A
2/15
Style 1 - Stainless Steel (front view)
Style 2 - Overlay (f
ront view)
15"
(38.0 cm)
15"
(38.0 cm)
34¹⁄₈"
(86.8 cm)
30
¹⁄₄
"
(76.6 cm)
¹⁄₄"
(6.0 mm)
15"
(38.0 cm)
15"
(38.0 cm)
34¹⁄₈"
(86.8 cm)
30¹⁄₄"
(76.6 cm)
¹⁄₄"
(6.0 mm)
Drawer Height
Style 1 - Stainless Steel (side view)
Style 2 - Overla
y(side view)
*Dimension includes
³⁄₄
" (1.9 cm) thick custom drawer panel
19⁷⁄₈"
(50.5 cm)
21⁵⁄₈"
(55.0 cm)
44³⁄₁₆"
(112.3 cm)
19⁷⁄₈"
(50.5 cm)
21⁵⁄₈"
(55.0 cm)
*
Drawer Depth
Style 1- Stainless Steel (top view)
Style 2 - Overlay (top view)
*Dimension includes ³⁄₄" (1.9 cm) thick custom drawer panel
23⁷⁄₈"
(60.6 cm)
23
⁷⁄₈
"
(60.6 cm)
21⁵⁄₈"
(55.0 cm)
26.5"
(67.5 cm)
23⁷⁄₈"
(60.6 cm)
23⁷⁄₈"
(60.6 cm)
21⁵⁄₈"
(55.0 cm)
*
Drawer Width
■ Height dimensions are shown with the leveling legs extended to the minimum
height of Z\v" (6.35 mm) below the refrigerator drawers.
■ When leveling legs are fully extended to 1" (25 mm) below the refrigerator drawers,
add C\v" (19.05 mm) to the height dimensions. See “Product Dimensions.”
■ The power cord is 60" (152.4 cm) long.