Installation

13
3. Install the white decorative screws on the opposite side of the
door.
4. Plug into a grounded 3 prong outlet.
Custom Wood Panel Use
Custom Panel Dimensions
If you plan to install a custom overlay panel, you will need to
make the panel yourself or consult qualied cabinetmaker or
carpenter
IMPORTANT:
■ The thickness of overlay panel must be 3/4" (1.91 cm).
■ Overlay panel must not weigh more than 8lbs (3.62 kg).
■ Overlay panels weighing more than recommended may cause
damage to your ice maker.
■ Match wood grain direction with that of adjacent cabinets.
■ Sand panel edges to provide a smooth nish.
■ Use moisture sealer on both sides and all edges of the panel
to avoid damage from outside.
Option 1 - Without Hinge-Side Spacer
To allow proper clearance for the door, prepare the custom
overlay panel using the dimension shown.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
14 ¹⁷⁄₃₂"
(36.9 cm)
29 ¹⁄₂"
(74.9 cm)
1
¹⁄₄
"
(3.18 cm)
1
¹⁄₄
"
(3.18 cm)
¹⁄₄"
(6.35 mm)
¹⁄₄"
(6.35 mm)
³⁄₄"
(1.91 mm)
³⁄₄"
(1.91 mm)