Installation

15
3. Plug into a grounded 3 prong outlet. Install ice maker into
cabinet.
4. Push any extra drain hose, water line, or power cord in the
slot in the back panel.
NOTE: Any time ice maker is removed for service, do the
same process when placing the unit back in the cabinets.
5. Secure the top and bottom hinges to the side of the cabinet
using wood screws.
6. Holes are provided on the non hinge side for cabinet brackets
installation. Attach cabinet brackets (provided with unit) to
front of ice maker as shown in the illustration. Attach the
cabinet brackets to the side of the cabinet with wood screws.
7. Lightly press the custom panel onto the door using double
sided adhesives. Adjust height of the panel to achieve a 1/8"
gap between top of door panel and counter sealing gap.
Press the panel rmly against door.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
Cabinet bracket