Installation

9
Door Panel and Hinge Removal
1. Unplug the ice maker or disconnect power.
2. Remove the hinge cover from the upper and lower hinges.
3. To remove, cut hinge cover at indicated point using diagonal
cutting plier and remove from around hinges.
NOTE: Reinstall the hinge covers if product is removed from
cabinet installation.
4. Remove the plastic screw cover from the inside of the hinges
and set aside.
5. Remove the top and bottom plastic end caps from the door.
6. Unscrew the door hinge screws completely. Remove hinge pin
from top hinge and set aside.
7. Loosen the cabinet Phillips head screws halfway, so that the
hinge can slide off.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
Crush Hazard
Articulated hinges are self closing and many pinch
points exist prior to cabinet installation.
Do not remove hinge covers until product is ready to
be installed.
Failure to follow these instructions can result in crush,
cut, or pinch injuries.
WARNING