Owner's Manual
Table Of Contents
- ICE MAKER SAFETY
- Ice Maker Safety
- IMPORTANT CONSUMER INFORMATION
- Important Consumer Information
- ICE MAKER MAINTENANCE AND CARE
- How Ice Maker Works
- Normal Sounds
- Water Filtration System
- Interior Cleaning
- Exterior Cleaning
- Vac Extn Time Without Use
- INSTALLATION INSTRUCTIONS
- Unpack Ice Maker
- Location Requirements
- Electrical Requirements
- Drain Connection Requirements
- Drain Pump Installation (on some models)
- Water Supply Requirements
- Connect Water Supply
- Connecting the Drain
- Leveling and Securing
- Custom Wood Panel
- Auxiliary Grille Installation
- SECURITE DE LA MACHINE A GLACONS
- Sécurité de la machine à glaçons
- RENSEIGNEMENTS IMPORTANTS POUR LE CONSOMMATEUR
- Renseignements importants pour le consommateur
- ENTRETIEN ET REPARATION DE LA MACHINE A GLACONS
- Comment utiliser la machine à glaçons
- Sons normaux
- Système de filtration d’eau
- Nettoyage de l’intérieur
- Nettoyage des surfaces externes
- Vacances ou longue période d’inutilisation
- INSTRUCTIONS D'INSTALLATION
- Déballage de la machine à glaçons
- Exigences d’emplacement
- Electrical Requirements
- Exigences concernant le raccordement au drain
- Installation de la pompe de vidange (sur certains modèles)
- Spécifications de l’alimentation en eau
- Raccordement à la canalisation d’eau
- Raccordement de la vidange
- Leveling and Securing
- Panneau de bois personnalisé
- Installation de la grille auxiliaire
8
NOTES:
� Check that the power supply cord is not damaged or pinched
or kinked between the ice maker and the cabinet.
� Check that the water supply line is not damaged or pinched or
kinked between the ice maker and the cabinet.
� Check that the drain line (on some models) is not damaged or
pinched or kinked between the ice maker and the cabinet.
� Check that the ice maker door is not flush with the standard
cabinets to avoid problems with opening the ice maker door.
Model Identification:
Standard model Custom panel model
Standard Model Utilities
A Width (for 15ʺ ice maker) 15ʺ (38.1 cm) Minimum
Width (for 18ʺ ice maker)
18ʺ (45.7 cm) Minimum
B Width of outlet location 6ʺ (15 cm)
C Outlet location—distance
from side
1ʺ (2.5 cm)
D Outlet location—distance
from bottom
12ʺ (30.5 cm)
E Width of water connection
location
3 1/2ʺ (8.9 cm)
F Height
34ʺ (86.4 cm) Minimum
34 1/2ʺ (87.6 cm) Maximum
G Height of outlet location 8ʺ (20.3 cm)
H Height of water connection
location
9ʺ (22.9 cm)
I
Depth of cabinet (minimum)
24ʺ (61.0 cm)
e
Recommended electrical connection location
w
Recommended water connection location
Model Utility/Air Flow Slot
C
E
A
B
F
D
7½"
(19.05 cm)
7½"
(19.05 cm)
Required zone
for utility hole/slot
cutout location
Utility/Air Flow Slot/Cutout Location Zone
Dimension A 14" (35.56 cm)
B 10.5" (26.67 cm)
C 7ʺ (17.8 cm)
D 0.75" (1.9 cm)
Diameter of the hole E 2ʺ (5.1 cm)
Dimension of cutout F 2ʺ (5.1 cm)
� Auxiliary pump ice maker models have been designed for flush
install in instances where the power supply, water supply, and
drain are located in adjacent cabinetry.
� For installation of product with utilities behind the ice maker,
flush install may not be achieved.
� Refer to the “Model Utility/Air Flow Slot” illustration, table for
utility/air flow slot cutout location, and paper template for
utility/air flow slot cutout location.