Ice Maker User Manual

0
perating Instructions
l For complete operation information, refer to
the Use and Care Guide.
l Before starting, wash out interior of cabinet
with a Baking Soda solution (2 tablespoons
[26 grams] soda to 1 quart [l liter] of warm
water). Rinse thoroughly.
l Make certain the water is turned on.
l Turn switch to the “ON” position.
IMPORTANT: Allow unit to run for 3 hours
before expecting ice and for 24 hours before
trying to set the thickness control.
If installed more than 2,000 feet (600 m)
above sea level, see page 3 for thermostat
adjustments.
CUllER GRID
Vi” x?h” (19 mm x 19 mm)
9