Dimension Guide

IMPORTANT:
 The graphics in following sections show a custom
panel for a door with the hinges installed on the
right-hand side.
If your refrigerator has the hinges installed on the left-
hand side, rotate the custom frame 180° so the hinge
markings will be on the left.
Wood Panel Guide
4
W11530525 12/2020
®
/™ ©2020 All rights reserved. Used under license in Canada.
 Panel dimensions shown are the minimum size to
cover the appliance door.
Panels can be made taller/ wider to match
surrounding cabinetry.
 The recommended thickness of the overlay panel is
3/4” (19 mm).
 Custom solid door overlay panel must not weigh
more than 20 lbs (9.07 kg).
 Custom glass door overlay panel must not weigh
more than 10 lbs (4.54 kg).
 Overlay panels weighing more than recommended
may cause damage to your appliance.
2"
(53 mm)
1/4"
(7 mm)
1/8"
(3 mm)
1/2"
(12 mm)
4
15
/16”
(125 mm)
23
3
/4”
(60.3 cm)
17
1
/16”
(43.3 cm)
21
13
/16”
(55.4 cm)
30
5
/8”
(77.75 cm)
2"
(53 mm)
1/4"
(7 mm)
1/8"
(3 mm)
1/2"
(12 mm)
4
15
/16”
(125 mm)
23
3
/4”
(60.3 cm)
30
5
/8”
(77.75 cm)
Glass door overlay panel
Glass door
overlay panel
and hinge routing
dimensions.
Solid door overlay panel
Solid door overlay
panel and hinge
routing dimensions.
CAUTION: Installation of door panels with less than
a 3/8” (0.95 cm) gap between the door panel and
the adjacent cabinet increases the risk of potential
pinching.