Use & Care Guide

Wine Racks

Remove and Replace the Wine Racks

NOTE: When storing large bottles or magnums, remove the rack

directly above.

1. Pull the rack forward until it stops.

2. Release the rack from the supports.

■ Style 1 - Push in on the tabs to release the rack.

■ Style 2 - Lift up on the left-hand lever while pressing

down on the right-hand lever to release the rack.

3. Pull the rack forward and lift it up and out of the rack

supports

4. Replace the rack by inserting the rack into the supports and

sliding it toward the rear of the wine cellar.

Stocking the Wine Cellar

NOTES:

■ For optimum wine storage, place white wines on the upper

rack of the wine cellar and place red wines on the lower rack

of the wine cellar.

■ The wine racks can be stocked with the bottles facing either

direction, however, to optimize storage adjacent bottles

should be facing in opposite directions.

To Stock the Wine Cellar

1. Start stocking the wine cellar with the bottom display rack.

2. Starting on the left-hand side, place the first bottle on the

bottom of the rack with the neck of the bottle facing the front

of the wine cellar.

3. Place the next bottle on its side with the neck of the bottle

facing the back of the wine cellar. Alternate the direction of

the bottles, in this manner, until the display rack is full.

4. Slide the bottom rack into place and pull the next rack

forward.

5. Continue stocking each remaining rack as described in the

above steps.

A. Tabs

A. Lever