Use and Care Manual

8
OPERATING THE EASY CLEAN JUICERASSEMBLING THE EASY CLEAN JUICER
NOTE: The lid of the juice pitcher comes
equipped with a foam guard. To include the
foam with your juice, simply remove the lid
before pouring juice into your glass.
6
Slide the pulp basket into position under
the long lid section until it rests against
the motor body.
5
Slide the food pusher down the feed
chute, aligning the groove in the food
pusher with the protruding rib on the
inside of the feed chute.
7
Place juice pitcher under the juice spout.
Make sure juice spout is in the down
position.
Rotating
hub
3
Place the ceramic disc inside the
juicing bowl on top of the rotating hub.
Rotate the disc until the tabs on the
inside of the collar match up with the
notches on the hub and the disc settles
easily into place.
4
Place the juicer lid over the bowl
housing so that the long lid section
is slightly to the right of the pulp exit
chute. Grip the feed chute, turning the
lid clockwise until it locks into place.
W10673583C_ENv01.indd 8 9/3/14 4:21 PM