Cooking Appliance and Ventilation Pairing Guide

UNDER CABINET HOODS
30” - KVUB400GSS
36” - KVUB406GSS
30” - KVUB600DSS
36” - KVUB606DSS
30” - KXU2830JSS
36” - KXU2836JSS
DOWNDRAFT
30” - KXD4630YSS
36” - KXD4636YSS
KFDC500J KFGC506JKFGC500J
KCGC506JSS KCGC500JSS KFDC506J KFDC558J KFGC558J KCGC558JSS
COMMERCIAL STYLE RANGES / RANGETOPS AND VENTILATION PAIRING GUIDE
WALL MOUNT AND
ISLAND MOUNT HOODS
30” - KVWB400DSS
36” - KVWB406DSS
30” - KVWB600HBS
36” - KVWB606HBS
36” - KVIB606DSS
PRO STYLE VENTILATION
AND LINERS
30” COMMERCIAL STYLE
RANGES / RANGETOPS
36” COMMERCIAL STYLE
RANGES / RANGETOPS
48” COMMERCIAL STYLE
RANGES / RANGETOPS
RANGES AND RANGETOPS
** Motor Class CFM rating
Observe all governing codes and ordinances. Have a qualified technician install the range hood. It is the installer’s responsibility to comply with
installation clearances specified on the model/serial/rating plate. The model/serial/ rating plate is located inside the range hood on the rear wall
of the range hood. Canopy range hood location should be away from strong draft areas, such as windows, doors and strong heating vents.
Cabinet opening dimensions that are shown must be used. Given dimensions provide minimum clearance. The canopy range hood is factory
set for venting through the roof or through the wall. All openings in ceiling and wall where canopy range hood will be installed must be sealed.
IMPORTANT: Dimensional specifications are provided for planning purposes only. Do not make any cutouts based on this information.
Refer to installation instructions packaged with product before selecting cabinetry, making cutouts or beginning installation.
30” - KVUC600KSS
36” - KVUC606KSS
36” - KVWC906KSS
48” - KVWC908KS S
36” - KVWC956KSS
48” - KVWC958KSS
30” - UVL5430JSS
36” - UVL60 36JSS*
48” - UVL6048JSS*
* Custom hood liners paired with commercial style ranges and rangetops mu st be used with blower: UXB1170KYS (1,170 CFM)