Cooking Appliance and Ventilation Pairing Guide

UNDER CABINET HOODS
30” - KVUB400GSS
36” - KVUB406GSS
30” - KVUB600DSS
36” - KVUB606DSS
30” - KXU2830JSS
36” - KXU2836JSS
DOWNDRAFT
30” - KXD4630YSS
36” - KXD4636YSS
KCES550H KCES556HKCED600G KCED606GKICU500X KICU509X KICU569X
ELECTRIC COOKTOP AND VENTILATION PAIRING GUIDE
WALL MOUNT AND
ISLAND MOUNT HOODS
30” - KVWB400DSS
36” - KVWB406DSS
30” - KVWB600HBS
36” - KVWB606HBS
36” - KVIB606DSS
PRO STYLE VENTILATION
AND LINERS
ELECTRIC COOKTOPS
30” ELECTRIC
COOKTOPS
36” ELECTRIC
COOKTOPS
30” INDUCTION
COOKTOPS
36” INDUCTION
COOKTOPS
** Motor Class CFM rating
Observe all governing codes and ordinances. Have a qualified technician install the range hood. It is the installer’s responsibility to comply with
installation clearances specified on the model/serial/rating plate. The model/serial/ rating plate is located inside the range hood on the rear wall
of the range hood. Canopy range hood location should be away from strong draft areas, such as windows, doors and strong heating vents.
Cabinet opening dimensions that are shown must be used. Given dimensions provide minimum clearance. The canopy range hood is factory
set for venting through the roof or through the wall. All openings in ceiling and wall where canopy range hood will be installed must be sealed.
IMPORTANT: Dimensional specifications are provided for planning purposes only. Do not make any cutouts based on this information.
Refer to installation instructions packaged with product before selecting cabinetry, making cutouts or beginning installation.
30” - KVUC600KSS
36” - KVUC606KSS
36” - KVWC906KSS
48” - KVWC908KS S
36” - KVWC956KSS
48” - KVWC958KSS
30” - UVL5430JSS
36” - UVL60 36JSS*
48” - UVL6048JSS*
* Custom hood liners can be used with any of the following blower motors:
UXB1170KYS (1,170 CFM), UXI1200DYS (1,200 CFM), UXB0585KYS (585 CFM)