Owners Manual

9
Install Range Hood Internal Blower Motor
IMPORTANT: The blower has to be installed before installing the
hood to the wall.
1. Install the range hood blower motor assembly inside the
range hood with the wiring connection to the left for the
single motor system and to the front or top for the dual
motor system.
Single Blower Motor Assembly
Dual Blower Motor Assembly
2. Slide the left mounting plate ange under the motor
mounting bracket.
3. Run the power supply wires and connector from the range
hood through the hole in the right end of the motor mounting
plate.
4. Push the right end of the motor mounting plate up and snap
it into the spring tab.
NOTE: The spring tab should be outside the slot in the
mounting plate.
A. Wiring connection
A
A
A. Wiring connection
B
A
A. Motor mounting bracket
B. Mounting plate left ange
A. Motor mounting plate
B. Power supply wires and connector
B
A
B
A
A. Motor mounting plate
B. Spring clip