Health & Safety and Installation guide
EN ENGLISH Health and Safety guide Installation guide 2 3 5
SAFETY INSTRUCTIONS IMPORTANT TO BE READ AND OBSERVED Before using the appliance carefully read these safety instructions. Keep them close at hand for future reference. These instructions and the appliance itself provide important safety warnings, to be observed at all times. The manufacturer declines any liability for failure to observe these safety instructions, for inapropriate use of the appliance or incorrect setting of controls.
ELECTRICAL WARNINGS For installation to comply with current safety regulations, an omnipolar switch with minimum contact gap of 3 mm is required and the appliance must be earthed. If the power cable is damaged, replace with an identical one. The power cable must only be replaced by a qualified technician in compliance with the manufacturer instruction and current safety regulations. Contact an authorized service center.
EN DECLARATION OF CONFORMITY This appliance has been designed, constructed and distributed in compliance with the requirements of European Directives: LVD 2014/35/EU, EMC 2014/30/EU and RoHS 2011/65/EU. This appliance, which is intended to come into contact with foodstuffs, complies with European Regulation n. 1935/2004. This appliance meets the Eco Design requirements of European Regulations n. 65/2014, and n. 66/2014 in conformity to the European standard EN 60350-1.
x2 90°C 6
EN 89° max 20 423 557 97 478 2 2 595 89° max 530 575 2 595 549 min 560 min 560 560 600 40 560 583+2 40 5 7
= 001 = x2 400010906031 Printed in Italy 8
