Installation Instructions

LEVELING FEET INSTALLATION INSTRUCTIONS

Prepare Built-In Microwave/Oven

Combination

1. Decide on the final location for the oven. Locate existing

wiring to avoid drilling into or severing wiring during

installation.

2. To avoid floor damage, set the oven onto cardboard prior to

installation. Do not use handle or any portion of the front

frame for lifting.

3. Remove the shipping materials and tape from the oven.

4. Remove the hardware package from inside the bag

containing literature.

5. Remove and set aside racks and other parts from inside the

oven.

6. Move oven and cardboard close to the oven’s final location.

Remove Oven Door

IMPORTANT: Use both hands to remove oven door(s).

1. Open the oven door.

2. Locate the oven door latches in both corners of the oven

door, and rotate the latches forward to the unlocked position.

3. Grasp the edges of the oven door with both hands and close

the oven door until it will no longer close. Lift and pull oven

door toward you and remove. Set the oven door aside on a

covered work surface.

Positioning Oven Feet for Multiple Cabinet

Cutout Heights

Combo Ovens

The positioning of the oven feet allow a combo oven to be

installed in a cutout height between 41¹⁄₈" (104.5 cm) and 43⁵⁄₁₆"

(110.0 cm). Refer to the following instructions to position the feet

for the size of your cabinet cutout.

Cutout height is between 41¹⁄₈" (104.5 cm) and 41½"

(105.5 cm)

The oven feet do not need to be changed. The combo is

configured correctly as received.

NOTE: Do not remove the spacers.

Go to the “Make Electrical Connection” section of the Installation

Instructions that came with the product.

A. Oven door latch in locked

position

B. Oven door latch in unlocked

position

WARNING

Excessive Weight Hazard

Use two or more people to move and install oven.

Failure to do so can result in back or other injury.

A. Spacers