Installation Instructions

13
Starting the Ice Maker
1. Wash out the ice pan, and then slide it under
the ice maker (see the side diagram) as far as
it will go.
IMPORTANT: On bottom-mount models the Ice
pan is placed below the ice maker and the multi
utility shelf. The Ice maker should be screwed
onto the multi utility shelf, so the Ice bucket must
t easily on the freezer compartment.
2. Place the items back into the freezer
compartment.
3. Turn the switch “on” (see the side diagram),
and close the freezer door. The ice maker will
begin to make ice within 24 hours.
NOTE: Usually it takes approximately 24 hours
for the ice maker to begin producing ice. Once ice
is available, you may notice that it has an
“o󰀨-taste”. If this happens, make two or three
batches of ice and discard them. After that the
“o󰀨-taste” should be gone. If you have any
problem, refer to “Trouble shooting” on page 13.
Top Mount & Bottom Mount models