Installation Instructions
Table Of Contents
- MICROWAVE HOOD COMBINATION SAFETY
- Section i & Ii
- INSTALLATION REQUIREMENTS
- SECTION I only
- SECTION II only
- SEGURIDAD DE LA COMBINACIÓN DE MICROONDAS Y CAMPANA
- Sección II y I
- REQUISITOS DE INSTALACIÓN
- SECCIÓN I únicamente
- SECCIÓN II únicamente
- SÉCURITÉ DE L’ENSEMBLE HOTTE/FOUR À MICRO-ONDES
- Sections I et II
- EXIGENCES D’INSTALLATION
- SECTION I seulement
- SECTION II seulement
5
SECTION I only
This section is used for around 17
1
/
8
" (43.5 cm) product height
installation.
Installation Dimensions
NOTE: The grounded 3 prong outlet must be inside the upper
cabinet. See the “Electrical Requirements” section.
*30" (76.2 cm) is typical for 66" (167.6 cm) installation height.
Exact dimensions may vary depending on type of range/cooktop
below.
NOTE: To ensure good performance, do not obstruct top vent
airow. If cabinets are deeper than 14" (35.6 cm) but no more
than 15" (38.1cm), use the bump out mounting kit replacing the I
bar mounting plate from the wall. The bump out mounting kit
(part # W11185746) is not provided and can be sourced
independently from Whirlpool.
Product Dimensions
*Overall depth of product will vary slightly depending on door
design.
A. 2" x 4" (5.1 cm x 10.2 cm) wall stud
B. Grounded 3 prong outlet
12" (30.5 cm) min.
14" (35.6 cm) max.
30"
(76.2 cm)
min.
AB
upper cabinet and
side cabinet depth
30"
typical*
)mc2.67 (
66" (167.6 cm) min.
14"
I bar mounting plate
12"
DEEPER
15"
Bump out mounting
bracket
14"
DEEPER
(41.3 cm
)
16
1
/
4
"
17
"
(43.5 cm
)
+/- "
(0.5 cm)
16
Up to
4
"
cm)
/
"29
7
8
(76.0
3
/
16
1
/
8
(42.5 cm)
*
3
/