Bump Out Kit Installation Instructions

6
Mark Upper Cabinet
1. Using measuring tape, and clearly mark the vertical centerline
of the opening. Make sure it is align with the vertical wall
centerline.
The upper cabinet template is t for depth of 13" (35 cm) to
16" (40.6 cm) cabinet installation, but need some adjustment
for different depth. See the following steps.
2. Using measuring tape, measure the depth of the cabinet. The
upper cabinet template is for variable cabinet depth use, nd
a dimension of your cabinet in below table.
NOTE: There are two install methods, one is ush to the
cabinet door, another one is stand-out from the cabinet
door. Find the dimension of your cabinet in above table, the
dimensions in the left colomn are ush to the cabinet door,
the dimensions in the right colomn are stand-out from the
cabinet door.
Flush to the cabinet door, front allignment installation,
follow below steps:
3. For example, the cabinet depth is 14" (35.6 cm), you need to
cut or fold the grey portion of the upper cabinet template.
4. Place and tape the upper cabinet template against the
bottom of the upper cabinet.
NOTES:
■ Make sure the front edge of the upper cabinet template
align with the front edge of upper cabinet.
■ Make sure the center marks on the upper cabinet
template align with the upper cabinet centerline which
draw in step 1.
NOTE: If the upper cabinet doors protrude from the upper
cabinet, the template can be adjusted outward to be ush
with the upper cabinet door.
Stand-out from the cabinet door, back allignment
installation, follow below steps:
5. For example, the cabinet depth is 13
1
/
2
" (34.2 cm), you need
to cut or fold the grey portion of the upper cabinet template.
A. Upper Cabinet Centerline
B. Wall Centerline
A
B
B
D
C
A
A. Front Edge of the Upper Cabinet Template
and Front Edge of Upper Cabinet
B. Upper Cabinet Centerline
C. Arrows on Upper Cabinet Template
D. Center Marks on Upper Cabinet Template
B
A
Bump Out Mounting Plate
Cabinet
Microwave
oven door
12 1/2’’ (31,8 cm)
6 1/4’’ (15,9 cm)
4 3/4’’
(12,1 cm)
F
D E
10 15/16 ’’ (27.7 cm)
11 7/16 ’’ (29.0 cm)
11 15/16 ’’ (30.3 cm)
12 7/16 ’’ (31.5 cm)
12 15/16 ’’ (32.8 cm)
6 3/8’’ (16,2 cm)
G
6 7/16’’ (16.3 cm)
6 15/16’’ (17.6 cm)
7 7/16’’ (18.9 cm)
7 15/16’’ (20.1 cm)
8 7/16’’ (21.4 cm)
2 7/8’’ (7.2 cm)
P/N: W11646786A
(Front alignment)
(Alineación frontal)
(Alignement avant)
2 7/8’’ (7.2 cm)
(Front alignment)
(Alineación frontal)
(Rear alignment)
(Alineación trasera)
(Alignement arrière)
10 15/16 ’’ (27.7 cm)
11 7/16 ’’ (29.0 cm)
11 15/16 ’’ (30.3 cm)
12 7/16 ’’ (31.5 cm)
12 15/16 ’’ (32.8 cm)
(Rear alignment)
(Alineación trasera)
(Alignement arrière)
(Rear alignment)
(Alineación trasera)
(Alignement arrière)
D/E: Upper cabinet mounting holes.
F: Roof-venting area.
G: Power supplier cord hole.
D/E: Orificios para el montaje del gabinete superior.
F: Zona de ventilación del techo.
G: Orificio para el cable de alimentación de energía.
D/E : Trous de fixation du coffret supérieur
F : Zone d’évacuation du toit
G : Trou du cordon d'alimentation.
(Alignement avant)
UPPER CABINET TEMPLATE /
PLANTILLA PARA EL GABINETE SUPERIOR /
GABARIT POUR PLACARD SUPÉRIEUR
A. Front Edge of Template
B. Upper Cabinet Door
Flush Depth (cabinet + door) Stand-out Depth
(cabinet + door)
L
13
3
/
4
" to 14"
(35 cm to 35.6 cm)
13" to 13
3
/
4
"
(33 cm to 35 cm)
M
14
1
/
4
" to 14
1
/
2
"
(36.2 cm to 36.8 cm)
14" to 14
1
/
4
"
(35.6 cm to 36.2 cm)
N
14
3
/
4
" to 15"
(37.5 cm to 38.1 cm)
14
1
/
2
" to 14
3
/
4
"
(36.8 cm to 37.5 cm)
P
15
1
/
4
" to 15
1
/
2
"
(38.7 cm to 39.4 cm)
15" to 15
1
/
4
"
(38.1 cm to 38.7 cm)
R
15
3
/
4
" to 16"
(40 cm to 40.6 cm)
15
1
/
2
" to 15
3
/
4
"
(39.4 cm to 40 cm)