Manual

Hot Surface Indicator Light
The hot surface indicator light will glow as long as any surface
cooking area is too hot to touch, even after the surface cooking
area(s) is turned off.
SETTING RECOMMENDED USE
SIMMER Switch Precise simmer control.
(on some models)
WARM ZONE Keep cooked foods warm.
Element Switch
REMEMBER: When range is in use or (on some
models) during the Self-Cleaning cycle, the entire
cooktop area may become hot.
Fire Hazard
Turn off all controls when done cooking.
Failure to do so can result in death or fire.
The cooktop controls can be set anywhere between HI and LO.
OFF
Lo _ Hi
Hi
M*d
Push in and turn to the desired heat setting. Use the following
chart as a guide when setting heat levels.
SETTING RECOMMENDED USE
HI Bring liquid to a boil.
MED- HI Hold a rapid boil.
Quickly brown or sear food.
MED Maintain a slow boil.
Fry poultry or meat.
Cook pudding, sauce, icing or gravy.
MED- LO Stew or steam food.
Simmer.
LO Keep food warm.
Melt chocolate or butter.
Single and Dual-Size Elements
AO
A. Single size
A. Single size
B. Dual size
The Dual-Size Elements offer flexibility depending on the size of
the cookware, Single size can be used in the same way as a
regular element. The dual size combines both the single and
outer element and is recommended for larger size cookware,
large quantities of food and home canning.
To Use SINGLE:
1. Push in and turn knob counterclockwise from the OFF
position to the SINGLE zone anywhere between LO and HI.
2. Turn knob to OFF when finished,
To Use DUAL:
1. Push in and turn knob clockwise from the OFF position to the
DUAL zone anywhere between LO and HI.
2. Turn knob to OFF when finished,
13