Datasheet

x3
3
Assembly instructions
Push screws
through pins 0,
3V and GND on
the BBC micro:bit.
Screw on spacers.
Spacers can be hard to screw into
place, use pliers to help you.
Screw the nuts
onto the end
of each screw
to hold the
board in place.
Flick the power switch and your MI:power board
should be ready to use.
1
2
3
4
x3x3
x1
(Insert before
assembly, ‘+’
side up)
Line up the MI:power board with the screws, the
sounder should face the back of the BBC micro:bit.
Coin
cell
Assembly instrucons
Tools needed:
• Philips screwdriver
• Pliers
Dimensions (+/- 0.8mm)
Included parts
52.00
42.00
3.00
6.00
2.00
11.00 10.50
R2.00
30.50
1.60
3.90
52.00
42.00
3.00
6.00
2.00
11.00 10.50
R2.00
30.50
1.60
3.90
MI-power board for the BBC micro:bit
www.kitronik.co.uk/5610