User manual

6 7
Using the Dock Air
Before you can use the Dock Air, it will need
to be paired to your device.
To do this:
1. Simply connect the Dock Air to the
Apple 30-pin connector on your dock.
2. The LED will show a solid blue,
indicating that it is in pairing mode.
3. On your device, go to the Bluetooth
menu and search for new devices.
4. ‘Dock Air’ should appear in the list.
Select it and if asked for a passcode,
enter ‘0000’.
5. The blue LED should then start to flash
once every few seconds, meaning you
are connected and the Dock Air is ready
to use.
The pairing process will only have to be
completed once. When you disconnect your
device from the Dock Air, the Dock Air will
automatically go back into pairing mode.
To reconnect, simply go to the Bluetooth
menu on your device, find paired devices
and select ‘Dock Air’ to connect.
Converts many Apple
docks to wireless
1
Dock Air Adaptor
1. Bluetooth LED indicator