kitsound.co.uk JB. 2705 / Made in China. © KitSound™ 2013 Christchurch, Dorset.
OVATION SOUNDBAR SYSTEM USER MANUAL 1
2
We are craf tspeople. We are musicians. We are Kit Sound ™ And we all commit ourselves to achieving one shared goal: Bringing people closer to their music. By truly understanding music we stay true to its craft. Pure, rich, incredible sound. We’ll settle for nothing less.
At KS we believe your music deserves to be showcased on great quality products that don’t cost the earth. We might not all share the same taste in music (the ferocious disputes on music forums prove that), but whether it’s Irish folk, death metal or any number of obscure genres which seem to be multiplying by the minute, the artists responsible for connecting with you through their craft have bared their souls to do so. And we think that’s worth celebrating.
5
Box contents • KS Ovation soundbar • 3.5 mm audio cable • 3.5 mm jack to RCA jack audio cable • Optical audio and HDMI cables • Wall mounting bracket and hardware • User manual • Remote control Functions RESET Remote control The remote is required to operate the Ovation. 1. Power: turn on the unit/turn off to standby mode 6 2. RESET: reset treble and bass back to the default factory setting 3. Mute: on/off 4. Sound modes: MUSIC/MOVIE/NIGHT 5. VOL+/VOL-: volume up/down 6.
Functions Rear panel interface Note: Please connect the audio cables before switching on the unit • HDMI 1/HDMI 2: HDMI input • HDMI OUT: HDMI output • AUX 1/AUX 2: 3.5 mm audio input • OPTICAL: Optical digital audio input • DC IN: Please use the supplied power adapter (18 V/4 A) • ON/OFF: Power switch Note: Use the remote control to switch between input modes. When powered off/on, the unit will remember the last input mode.
Optical input The Optical Input can be used for superior sound quality over all other inputs. This input can be used for devices including televisions, DVD/Blu-ray players and games consoles. Using the supplied cable, connect one end to the Ovation and the other to your device. If your TV has an optical audio output, we recommend connecting this to the Ovation and connecting all your other devices to the TV.
Positioning For best results, the Ovation should be at ear level of normal listening, with the front facing the listening area and 10 cm away from the wall. Depending on your set up, you can either put the Ovation on your TV stand or mount it onto the wall. Wall mounting To avoid the risk of personal injury and damage to the unit, installation should be done only by qualified or competent persons. Note: For best results, the speaker should be installed at least 10 cm (4 inches) below your television.
Care for your Ovation Please DON’T • Get the Ovation wet • Drop the Ovation as this will invalidate your warranty • Open up the Ovation.
Troubleshooting No sound • Either the audio cables are not connected or the speaker is not in the correct mode • Ensure that the cables are connected and use the remote control to select the correct mode No power • The Ovation is not connected to the mains power or the adaptor is not connected to the Ovation • The off/on switch on the rear panel interface is not switched to ‘ON’ • Ensure that the adaptor is properly connected and press the ‘Power’ button on the remote control Remote control not working • Th
