Installation Instructions
Table Of Contents
- THIS EQUIPMENT COMPLIES WITH FCC REQUIREMENTS
- Package Contents
- Install the CT Series Clock
- PayClock Online
- Using the CT Clock
- Employee Transactions
- Clocking IN/Out - Finger Sensor (CT72)
- Clocking IN/Out - Badge
- Clocking IN/Out - PIN
- Department Transfers - Finger Sensor (CT72)
- Department Transfers - Badge
- Department Transfers - PIN
- Amount Entries - Finger Sensor (CT72)
- Amount Entries - Badge
- Amount Entries - PIN
- Viewing Totals - Finger Sensor (CT72)
- Viewing Totals - Badge
- Viewing Totals - PIN
- Employee Transactions
- Supervisor Transactions
- Enrolling Fingers
- Administrator Functions
- Troubleshooting the CT Series
- Appendix A – Testing the Connection to PayClock Online
- Appendix B – Installing a Battery
- Appendix C – Adjusting Finger Sensitivity
- Appendix D – Bell Relay Connections
- Appendix E – Access Relay Connections
- Appendix F – Add/Edit/Delete Bell Events
- Blank Page
Using the CT Clock • 9
• When the badge is read a confirmation beep will sound, a text
message will appear, a custom audio message may be played,
and the display will turn either green or red indicating a good or
bad transaction.
Clocking IN/Out - PIN
• Tap the Clock In/Out button on the touch-pad of the clock.
• The IDENTIFICATION screen will display. Using the numeric key
pad enter the employee’s PIN number and tap OK.
• A confirmation beep will sound, a text message will appear, a
custom audio message may be played, and the screen will turn
either green or red indicating a good or bad transaction.
Department Transfers - Finger Sensor (CT72)
• Tap the Transfer button on the touch-pad of the clock.
• The IDENTIFICATION screen will display. Place an enrolled
finger on the finger sensor of the clock. A confirmation beep will
sound and the list of available departments will display.
• Tap the desired department. A confirmation screen will display
showing the department into which the employee transferred.
Department Transfers - Badge
• Tap the Transfer button on the touch-pad of the clock.
• Move the badge over the badge reader symbol on the front of
the clock.
• When the badge is read a confirmation beep will sound, and the
list of available departments will display.
• Tap the desired department. A confirmation screen will display
showing the department into which the employee transferred.
Department Transfers - PIN
• Tap the Transfer button on the touch-pad of the clock.
• The IDENTIFICATION screen will display. Using the numeric key
pad enter the employee’s PIN number and tap OK. A
confirmation beep will sound and the list of available
departments will display.
• Tap the desired department. A confirmation screen will display
showing the department into which the employee transferred.