Installation Instructions

Administrator Functions • 17
Administrator
Functions
The CT clock has one administrator. The Settings function allows you to
review the device information, set up the network communications, set
the time / date, review an error log and reset the clock to the factory
defaults.
To enter the settings mode, at the clock tap the Settings button. The
IDENTIFICATION screen will display.
• Using the numeric key pad enter the administrator PIN number
and tap OK.
• The Administrator Menu screen will display.
Network
This menu allows you to configure the network communication settings
between the clock and PayClock Online.
At the clock tap the Settings button and enter the administrator PIN.
• The Administrator Menu screen will display.
• Tap Network. The Network Setup screen will display.
• If you want to set the clock’s IP address as a “Static” IP turn off
DHCP by tapping the button. The screen will refresh and the
fields will become active.
• Tap IP Address. The IP Address screen will display.
• Using the numeric key pad enter the IP address you want to
assign to the clock and tap OK.
• Do the same for the Subnet Mask and Gateway.
• When finished tap to return to the default screen.