Installation Instructions
Table Of Contents
- THIS EQUIPMENT COMPLIES WITH FCC REQUIREMENTS
- Package Contents
- Install the CT Series Clock
- PayClock Online
- Using the CT Clock
- Employee Transactions
- Clocking IN/Out - Finger Sensor (CT72)
- Clocking IN/Out - Badge
- Clocking IN/Out - PIN
- Department Transfers - Finger Sensor (CT72)
- Department Transfers - Badge
- Department Transfers - PIN
- Amount Entries - Finger Sensor (CT72)
- Amount Entries - Badge
- Amount Entries - PIN
- Viewing Totals - Finger Sensor (CT72)
- Viewing Totals - Badge
- Viewing Totals - PIN
- Employee Transactions
- Supervisor Transactions
- Enrolling Fingers
- Administrator Functions
- Troubleshooting the CT Series
- Appendix A – Testing the Connection to PayClock Online
- Appendix B – Installing a Battery
- Appendix C – Adjusting Finger Sensitivity
- Appendix D – Bell Relay Connections
- Appendix E – Access Relay Connections
- Appendix F – Add/Edit/Delete Bell Events
- Blank Page
Appendix A – Testing the Connection to PayClock Online • 25
Appendix A – Testing
the Connection to
PayClock Online
Important
This tool has been designed to assist you in the event the clock fails to
connect to PayClock Online. Even with this tool it may be necessary to
involve your IT department or someone familiar with your network if you
have connection issues.
The CT series clock has a function that will allow the user to test the
connection to PayClock Online. This test will verify the internet
connection, access to the internet through the required ports and the
connection to the PayClock Online service.
With the clock powered up and connected to the network, tap the
Settings button and enter the administrator PIN.
• The Administrator Menu screen will display.
• Tap Support and then Test Connection.
Test 1 - Internet connection test.
Pass = The test cycle will move to the port test.
Fail – What should I do if this test fails?
• Does another device successfully connect to the internet?
Such as a laptop(wired/wifi) or a smartphone(wifi).
• Does the clock show an IP address?
Wired = Go to Settings>Network
Wifi = Go to Settings>Wireless>Advanced
• If no IP Address shows contact your IT department for
assistance.