Safety Data Sheet

Voltage>35.0interface;double press on the button to increase 1v
while 3 click on button to decrease 1V.If the detected voltage is
higher than the setting voltage,the test will make a beeping alarm
sounds.(It's best not to adjust this interface)
7.Low Voltage Protection Function:
Switch to the voltage < 0.00V interface,the default voltage threshold
is 0.00V.To adjust the low voltage(0.00V-34V Range Setting),double
click on the button to increase 1v while 3 clicks on button to
desrease 1V(Long press the key will continually reduce or add the
data to the voltage).If the detected voltage is lower than the setting
voltage,the test will make a beeping alarm sounds.
(It's best not to adjust this interface)
8. Overcurrent Protection Function:
Switch to the voltage>10.0A interface,the default current threshold is
10.0A.To adjust the current(0.20A-15.0A Range Setting),double click on
the button to increase 1A while 3 clicks on button to decrease 1A(Long
press the key will continually reduce or add the data to the current).If the
detected current is lower or higher than the setting current, it will make a
beeping alarm sounds.(It can be adjusted to 15A at most. It is
not recommended to modify it if there is no special need.)