iPROTECT 1215 microwave pointer USER MANUAL
It is possible that foes can spy on you using radio microphones working on 'stealth' microwave frequency bands. Conventional RF detectors are typically capable of discovering signals up to 4-6 GHz; therefore higher frequencies usually stay unstudied during sweeping procedures, unless you apply an expensive spectrum analyzer. The new microwave pointer-probe iProtect 1215 was designed to extend the checked frequency range during sweeping procedures up to 13 GHz.
CONTROLS High-sensitive RF antenna Attenuator function Power on/off 16-segment bargraph 19 mm 172 mm Vibrating and audio modes PARTS DESCRIPTION The iProtect 1215 microwave pointer has a 16-segment bargraph indicator which allows the operator to see the slightest changes in the level and, as such, accurately find the area with the strongest signal for location. When it is necessary to decrease the sensitivity, typically during the location process, the operator can use the attenuator function ATT.
SWEEPING The iProtect 1215 pointer is an auxiliary device designed to extend the checked frequency range during the TSCM sweeping procedure. Therefore it should be used together with a standard RF detector or other equipment in order to perform a comprehensive check. To avoid false detections turn off all RF transmitting devices before starting the sweeping procedure: Wi-Fi routers and Wi-Fi devices (printers, video cameras, laptops, etc.) Cordless phones Cell phones Bluetooth devices, etc.