CTBTSR9050 18V Cordless Radio/BlueTooth Speaker E508280 ORIGINAL INSTRUCTIONS FR TRADUCTIONDES INSTRUCTIONS ORIGINALES ES TRADUCCIÓN DE LAS INSTRUCCIONES ORIGINALES READ AND SAVE THESE INSTRUCTIONS LIRE ET SAUVEGARDER CES INSTRUCTIONS LEA Y CONSERVE ESTAS INSTRUCCIONES ZCTBTSR9050 1 (04/21)
CTBTSR9050 18V Cordless Radio/BlueTooth Speaker Safety Messages • Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. • Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. • Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.
• Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury or fire. • When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. • Under abusive conditions, liquid may be ejected from the battery; avoid contact.
Battery Pack Safety Messages • Do not short battery pack. • Do not touch the terminals with any conductive material. • Avoid storing battery pack with conductive materials such as nails, screws, coins, and other metallics objects. • Do not carry battery pack in aprons or pockets that contain conductive objects. Short circuit can cause fire and severe burns. Safety Rules for Battery Disposal Risk of explosion or fire.
IMPORTANT SAFETY INSTRUCTIONS Battery Charger Safety Messages DANGER —TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS. 1. This manual contains important safety and operating instructions for the Snap-on CTC720 Rev. B, CTC720 Rev. C, CTC131,CTC123 Charger. Risk of electric shock and fire. • Do not insert battery pack into charger if case is cracked or damaged. Electric shock and fire can cause injury.
Life CTB185/CTB8185............................. 1000 cycles Note: 1 cycle=1 charge and 1 discharge 17. For the location of the nearest Snap-on repair center, please call Snap-on customer service at 1-877-7627664. 18. To reduce risk of battery explosion, follow these instructions and those marked on the battery. Capacity CTB185................................................... 5.0 A•H CTB8185................................................. 4.0 A•H CTB8187.................................................
Battery Charging 1. Insert the power cord plug into the socket of the charger. 2. Plug the other end of cord plug into power source outlet. 3. Insert battery pack in the charger. Position the battery pack so that the battery sits flush with the top of the charger. —The green light will start flashing. This indicates the charger is charging the battery pack. 4. The fuel gauge on the battery pack will display the charge percentage % value status. Standard fast charging time is 60 minutes.
Count number of flashes to figure out cycle count.
Maintenance VIBRATION HAZARD Service Service of a tool requires extreme care and knowledge. Service should be performed only by a qualified service technician. VOLTS • Always check tool for damaged parts before use. DIRECT CURRENT • Replace or repair damaged parts before use. Check alignment of moving parts. Binding of moving parts or broken parts may alter operation. n0 xxx/min • Have damaged parts properly repaired or replaced by an Authorized Service Center.
Battery Charger Troubleshooting PROBLEM ZCTBTSR9050 POSSIBLE CAUSES REASON/SOLUTION Undervoltage Replace battery with a fully charged battery.
SAVE THESE INSTRUCTIONS B Functional Description C D H EF G A A Power ON/OFF B Function Button C Back/Tune Button D LCD Display E Next/Tune Button F Play/Pause Button G Bluetooth Pair Button H Volume Control Knob I USB Port 5V/2.1A J AUX in Jack K Head Phone Jack L AC Power Port M Battery Port N Radio Antenna Cordless Radio/Bluetooth Speaker L Specifications AC Power Supply:............................................. 110V~60Hz DC Battery: ........................................................
FCC Regulations • This device complies with Part 15, Subpart B of the FCC Rules. Operation is subject to the following two conditions: Connecting a Bluetooth® Enabled device To turn the speaker off, press the Power ON/OFF (A) NOTE: The speaker will also turn off automatically if there is no activity or connection for 5 minutes 1. This device may not cause harmful interference, and 1. Confirm the battery is connected or an AC power cord is plugged into an AC power source 2.
3. Press the Function Button (B) until it cycles to the “AUX” function on the control panel Adjusting the Volume 4. Play music from your connected device 1. Volume can be adjusted on your connected device or by turning the volume control knob (H) of the CTBTSR9050 Using AM/FM radio 2. Once you have reached MAX volume of the CTBTSR9050, an audible “beep” will be heard to note MAX volume has been reached Ensure the radio antenna is properly installed. 1.
Incoming Calls: This speaker is equipped with an incoming call feature, which pauses audio once a call is accepted This feature activates automatically and play will resume when call is ended ZCTBTSR9050 14 (02/21)
Cordless Radio/Bluetooth Speaker - Parts List and drawing Key Number 1 CTBTS9050-1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 ZCTBTSR9050 Part name Replacement housing feet Power Board Decorative strip Battery compartment Layering Back shell AC plug AC plug bracket Main PCBA PCBA cover Left frame A Left frame B PVC sticker The port bracket S LOGO plate S LOGO bracket USB/Earphone/AUX PCBA Key Number 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33
18V Cordless Radio / Blue Tooth Speaker Symptom Cause Solution No Power AC plug not plugged into wall outlet Plug into wall outlet properly 18V Battery is not charged No Sound No battery connected to unit Insert charged battery Volume set too low Adjust volume to desired level Adjust volume of connected device Sound output of the connected device set too low (AUX IN & Bluetooth Mode) Sound Distortion Charge the battery Volume level set too high Reduce volume level by the VOL knob.
WARRANTY/SERVICE AND REPAIR Snap-on® Tools Limited One (1) Year Warranty Snap-on® Tools Company (the “Seller”) warrants only to original purchasers who use the Equipment in their business that under normal use, care and service, the Equipment (except as otherwise provided herein) shall be free from defects in material and workmanship for 1 year from the date of original invoice. Seller does not provide any warranty for accessories used with the Equipment that are not manufactured by Seller.
FCC warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.