User's Manual

2-6 System Setup
Cleaning the Carrier Station.
The carrier station is easily cleaned by wiping the surfaces with a cleanroom cloth dampened with
IPA. Nothing harsher is needed to remove contamination from the surface. Be sure to clean the
interior of the carrier station. Debris on the surface may cause stress points on the Integral Wafer
when the lid is closed. To avoid damage to the Integral Wafer, only clean the interior of the carrier
when the wafer is not present.
Recharging and Storing Integral Wafer
The carrier station contains removable, rechargeable lithium-ion batteries. The carrier station
batteries should maintain a charge on the wafer batteries for up to three years. The carrier station
batteries can be charged via USB or with the provided power adapter.
Very Important! Keep the wafer stored in a carrier station when not making thermal surveys.
This will help ensure the maximum lifetime for the onboard wafer batteries.
When storing the wafer in the carrier for extended periods of time, confirm that the LCD display
reads ‘Wafer Ready’. This indicates that the carrier station has established proper contact with the
wafer and ensures that the wafer battery charge is being maintained.
Non-contact Integral Wafer User Manual