User's Manual

Using the Carrier Station Controller 4-13
Transferring Wafer Data
1. Connect the carrier station to the computer with the USB cable. The program will
automatically recognize the wafer.
Figure 4-17. Getting Wafer Data
NOTE: If you are connected to the wafer through a carrier station, and there is data on the wafer, a
message appears for you to download the data.
Figure 4-18. Download Data
Click Yes to download the data or No to ignore it. Clicking Yes has the same effect as
pressing the Retrieve Last Survey button.
2. Once the button is active, click the Retrieve Last Survey button to transfer the latest
survey file to your computer.
3. A Name File and Enter Comment dialog box opens. Enter any comments you wish to
make about the file in the Comment box.
4. Click the OK button.
Non-contact Integral Wafer User Manual