Operation Manual

Contimuous Drainage
Screw o the water cap in the direction shown by the arrow and unplug the water plug. Insert the OD
13 mm PVC drain hose 8-10 mm into the water outlet and connect the drain hose to a sink.
Important Hints on Continuous Drainage
• When operating in the heating mode, adopt continuous drain; otherwise, the unit may shut down
due to full water.
• Put the drain hose in an inaccessible place at a height not above the water outlet and keep the
drain hose free from exure.
• When continuous drain is adopted, keep the drain cap and water plug properly.
Cleaning and Care
Clean the surface of the unit with wet soft cloth. Do not use chemical solvents such as alcohol and
gasoline; otherwise, the surface of the air-conditioner may be damaged and even the whole unit may
be damaged.
Cleaning of the lter frame and lter mesh
Clean the lter mesh once every two weeks. If the lter frame and lter mesh are clogged with dust,
the function of the air-conditioner may decrease
• Grip the gripping position of the
evaporator lter frame and the
condenser lter frame and take
out the lter frame gently in the
direction shown by the arrow.
• Grip the gripping position of the
evaporator lter mesh and con-
denser lter mesh and take out
the lter mesh gently in the direc-
tion shown by the arrow.
NOTE: when taking out the lter frame or lter mesh, the force shall
be applied evenly to avoid twisting or damage of the lter frame or
lter mesh. Be sure to take out the lter frame rst and then take out
the lter mesh.
16 17