SDS

06/26/2019Revision:
Page: 5
Klean-Strip Acetone
SAFETY DATA SHEET
05/24/2017Supersedes Revision:
For use in areas with inadequate ventilation or fresh air, wear a properly maintained and properly
fitted NIOSH approved respirator for organic solvent vapors.
For OSHA controlled work places and other regular users - Use only with adequate ventilation
under engineered air control systems designed to prevent exceeding the appropriate TLV.
A dust mask does not provide protection against vapors.
Respiratory Equipment (Specify
Type):
Splash goggles.
Eye Protection:
Wear gloves with as much resistance to the chemical ingredients as possible. Glove materials
such as nitrile rubber, natural rubber, and neoprene may provide protection. Glove selection
should be based on chemicals being used and conditions of use. Consult your glove supplier for
additional information. Gloves contaminated with product should be discarded and not reused.
Protective Gloves:
Various application methods can dictate use of additional protective safety equipment, such as
impermeable aprons, etc., to minimize exposure.
Other Protective Clothing:
Use process enclosures, local exhaust ventilation, or other engineering controls to control airborne
levels below recommended exposure limits.
Use only with adequate ventilation to prevent buildup of vapors. Do not use in areas where vapors
can accumulate and concentrate, such as basements, bathrooms or small enclosed areas.
Whenever possible, use outdoors in an open air area. If using indoors open all windows and doors
and maintain a cross ventilation of moving fresh air across the work area. If strong odor is noticed
or you experience slight dizziness, headache, nausea or eye-watering -- STOP -- ventilation is
inadequate. Leave area immediately and move to fresh air.
Engineering Controls
(Ventilation etc.):
Wash hands thoroughly after use and before eating, drinking, smoking, or using the restroom.
Do not eat, drink, or smoke in the work area.
Discard any clothing or other protective equipment that cannot be decontaminated.
Facilities storing or handling this material should be equipped with an emergency eyewash and
safety shower.
Work/Hygienic/Maintenance
Practices:
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical States:
[ ] Gas [ X ] Liquid [ ] Solid
Melting Point:
N.D.
Boiling Point:
133.00 F
Flash Pt:
0.00 F Method Used: TAG Closed Cup
Explosive Limits:
LEL: 2.5 % at 77.0 F UEL: 13.0 % at 77.0 F
Vapor Pressure (vs. Air or mm
Hg):
213 MM HG at 77.0 F
Vapor Density (vs. Air = 1):
N.D.
Evaporation Rate:
N.D.
pH:
N.D.
Clear colorless liquid with a characteristic ketone odor. Odor may be described as a sweet
pungent odor.
Appearance and Odor:
Flammability (solid, gas):
No data available.
Licensed to W.M. Barr and Company
GHS format