MSDS

05/17/2011Revision:
05/17/2011Printed:
11Page:
Klean Strip Adhesive Remover / Klean Strip
Premium Stripper
MATERIAL SAFETY DATA SHEET
10/13/2009Supercedes Revision:
[X] Yes [ ] No Acute (immediate) Health Hazard
[X] Yes [ ] No Chronic (delayed) Health Hazard
[ ] Yes [X] No Fire Hazard
[ ] Yes [X] No Sudden Release of Pressure Hazard
[ ] Yes [X] No Reactive Hazard
Regulatory Information
Methylene Chloride WHMIS Classification: D1B, D2A, D2B
Methylene Chloride WHMIS Health Effects Criteria Met by this Chemical:
D2B - Eye irritation - toxic - other
D2B - Skin irritation - toxic - other
D2A - Carcinogenicity - very toxic - other
D2B - Mutagenicity - toxic - other
D1B - TDG class 6.1 packing group III - toxic - immediate
Methylene Chloride WHMIS Ingredient Disclosure List: Included for disclosure at 0.1% or greater.
_____________________________________________
Methanol CAS Registry Number: 67-56-1
Methanol WHMIS Classification: B2, D1B, D2A, D2B
Methanol WHMIS Health Effects Criteria Met by this Chemical:
D1B - TDG class 6.1 packing group unknown - toxic - immediate
D2A - Teratogenicity and embryotoxicity - very toxic - other
D2B - Eye irritation - toxic - other
Methanol WHMIS Ingredient Disclosure List: Included for disclosure at 1% or greater. Meets criteria for
disclosure at 0.1%.
___________________________________________________
Stoddard Solvent CAS# 8052-41-3
WHMIS Classification:
B3 - Flammable and combustible material - Combustible liquid
D2B - Poisonous and infectious material - Other effects - Toxic
WHMIS Health Effects Criteria Met by this Chemical: D2B - Skin irritation - toxic - other
WHMIS Ingredient Disclosure List: Included for disclosure at 1% or greater.
This product has been classified according to the hazard criteria of the Controlled Products Regulations.
Concentrations reported in section 2 are weight/weight.
Ingredients disclosed in section 2 are on Canadian DSL.
16. Other Information
Company Policy or Disclaimer
The information contained herein is presented in good faith and believed to be accurate as of the effective date
shown above. This information is furnished without warranty of any kind. Employers should use this information
only as a supplement to other information gathered by them and must make independent determination of
suitability and completeness of information from all sources to assure proper use of these materials and the safety
and health of employees. Any use of this data and information must be determined by the user to be in
accordance with applicable federal, state and local laws and regulations.
Licensed to W.M. Barr and Company: MIRS MSDS, (c) A V Systems, Inc.
ANSI Z400.1 format