Material Safety Data Sheet

ManualsBrandsKlean-Strip ManualsPaint Thinners & SolventsKlean-Strip VM&P Naphtha

09/05/2014Revision:

09/19/2014Printed:

Page: 1

Klean-Strip VM&P Naphtha

SAFETY DATA SHEET

03/17/2014Supersedes Revision:

Klean-Strip VM&P Naphtha

Product Name:

W. M. Barr

Company Name:

2105 Channel Avenue

Memphis, TN 38113

3E 24 Hour Emergency Contact

Emergency Contact:

(800)451-8346

W.M. Barr Customer Service

Information:

(800)398-3892

(901)775-0100

Phone Number:

For thinning oil-based paint, enamel & varnish.

Intended Use:

www.wmbarr.com

Web site address:

QVM46, GVM46, CVM46

Synonyms:

1. PRODUCT AND COMPANY IDENTIFICATION

2. HAZARDS IDENTIFICATION

P233: Keep container tightly closed.

P210: Keep away from heat/sparks/open flames/hot surfaces. - No smoking.

P280: Wear protective gloves/protective clothing/eye protection/face protection.

P240: Ground/bond container and receiving equipment.

P241: Use explosion-proof electrical/ventilating/lighting equipment.

P243: Take precautionary measures against static discharge.

P242: Use only non-sparking tools.

P201: Obtain special instructions before use.

P202: Do not handle until all safety precautions have been read and understood.

P281: Use personal protective equipment as required.

GHS Precaution Phrases:

P370+378: In case of fire, use dry chemical to extinguish.

P303+361+353: IF ON SKIN (or hair): Remove/take off immediately all contaminated

clothing. Rinse skin with water/shower.

P308+313: IF exposed or concerned: Get medical attention/advice.

P301+310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.

P331: Do NOT induce vomiting.

GHS Response Phrases:

P403+235: Store in cool/well-ventilated place.

P501: Dispose of contents/container according to local, state and federal regulations.

P405: Store locked up.

GHS Storage and Disposal

Phrases:

H225: Highly flammable liquid and vapor.

H340: May cause genetic defects.

H304: May be fatal if swallowed and enters airways.

GHS Hazard Phrases:

Flammable Liquids, Category 2

Germ Cell Mutagenicity, Category 1B

Aspiration Toxicity, Category 1

Danger

GHS Signal Word:

Licensed to W.M. Barr and Company

GHS format

Summary of content (7 pages)

PAGE 1
SAFETY DATA SHEET Klean-Strip VM&P Naphtha Page: 1 Printed: 09/19/2014 Revision: 09/05/2014 Supersedes Revision: 03/17/2014 1. PRODUCT AND COMPANY IDENTIFICATION Product Name: Company Name: Klean-Strip VM&P Naphtha W. M. Barr 2105 Channel Avenue Memphis, TN 38113 Web site address: www.wmbarr.com Emergency Contact: Information: 3E 24 Hour Emergency Contact W.M. Barr Customer Service Intended Use: For thinning oil-based paint, enamel & varnish.
PAGE 2
SAFETY DATA SHEET Klean-Strip VM&P Naphtha Hazard Rating System: * HEALTH FLAMMABILITY PHYSICAL PPE 2 3 0 Page: 2 Printed: 09/19/2014 Revision: 09/05/2014 Supersedes Revision: 03/17/2014 Instability Flammability 3 Health 1 0 HMIS: OSHA Regulatory Status: Special Hazard NFPA: This material is classified as hazardous under OSHA regulations. Potential Health Effects (Acute and Chronic): Inhalation Acute Exposure Effects: Vapor harmful.
PAGE 3
SAFETY DATA SHEET Klean-Strip VM&P Naphtha Page: 3 Printed: 09/19/2014 Revision: 09/05/2014 Supersedes Revision: 03/17/2014 4. FIRST AID MEASURES Emergency and First Aid Procedures: Inhalation: If user experiences breathing difficulty, move to air free of vapors. Administer oxygen or artificial respiration until medical assistance can be rendered. Skin Contact: Irritation may result. Immediately wash with soap and water.
PAGE 4
SAFETY DATA SHEET Klean-Strip VM&P Naphtha Page: 4 Printed: 09/19/2014 Revision: 09/05/2014 Supersedes Revision: 03/17/2014 lights, stoves, etc. Do not use in small enclosed spaces, such as basements and bathrooms. Vapors can accumulate and explode if ignited. Do not spread this product over large surface areas because fire and health safety risks will increase dramatically. Precautions To Be Taken in Storing: Keep container tightly closed when not in use. Store in a cool, dry place.
PAGE 5
SAFETY DATA SHEET Klean-Strip VM&P Naphtha Page: 5 Printed: 09/19/2014 Revision: 09/05/2014 Supersedes Revision: 03/17/2014 9. PHYSICAL AND CHEMICAL PROPERTIES [ ] Gas [ X ] Liquid [ ] Solid Transparent, colorless Hydrocarbon solvent odor No data. Melting Point: 264.00 F - 291.00 F Boiling Point: 47.50 F Autoignition Pt: 69.00 F Method Used: TAG Closed Cup Flash Pt: LEL: 0.9 UEL: 6.7 Explosive Limits: Specific Gravity (Water = 1): 0.76 6.34 LB/GL Density: 11 MM HG at 20.0 C Vapor Pressure (vs.
PAGE 6
SAFETY DATA SHEET Klean-Strip VM&P Naphtha CAS # 64742-49-0 Page: 6 Printed: 09/19/2014 Revision: 09/05/2014 Supersedes Revision: 03/17/2014 Hazardous Components (Chemical Name) NTP IARC ACGIH OSHA Hydrotreated light naphtha n.a. n.a. n.a. n.a. 12. ECOLOGICAL INFORMATION No data available. 13. DISPOSAL CONSIDERATIONS Waste Disposal Method: Dispose in accordance with local, state, and federal regulations. 14.
PAGE 7
SAFETY DATA SHEET Klean-Strip VM&P Naphtha Page: 7 Printed: 09/19/2014 Revision: 09/05/2014 Supersedes Revision: 03/17/2014 materials and the safety and health of employees. Any use of this data and information must be determined by the user to be in accordance with applicable federal, state and local laws and regulations. Licensed to W.M.