Installation Instructions

COVER PANELS, MOULDING AND TOE KICKS
COVER PANELS
Exposed ends of closet uprights have the option
to be finished with a cover panel. Place cover panel
to the upright, lining up to be flush to the top of the
upright, and 3/4" past the front of the upright. Fasten
with the included screws through the pre-drilled holes
of the upright into the cover panel. More step-by-step
installation instructions are included with the cover
panel.
1
Note: Cover panels will be longer than your closet uprights.
You will need to cut your cover panel down in height, and
depth for some applications. For best results, lay painters
tape on the finished side of the panel before cutting. More
step-by-step cutting instructions are included with the
cover panel.
Note: Some cover panels are required in-between closet
bases during the installation process. All cover panels are
called out on your floor plan and elevation views of your
design packet printouts.
A notch will need to be cut out of the cover panel to fit
over existing base moulding. To cut, tape and trace the
notch of the closet upright onto the cover panel and
cut using a jigsaw.
2
X"
3/4”
4-3/16”
Video: Cutting Cover Panels - klearvuecabinetry.com
TOP MOULDING
Top moulding is an additional look that can be added
to your closet design. Follow step-by-step instructions
included with the moulding hardware.
TIPS FOR CUTTING MOULDING
When cutting your moulding, you follow many of the
same rules as when you cut cover panels. Tape and
mark your lines, then cut using a miter saw with a high
tooth-count blade. When using a miter saw, cut with
the finished side facing downward for the cleanest cut.
1
When connecting two pieces together, consider
painting or staining the inside edge of the moulding to
help hide seams. We also offer a color-matched caulk
to blend your seams together.
2
Video: Top Moulding - klearvuecabinetry.com
TOE KICK INSTALLATION
Cut the toe kick to length and place along the bottom
of the closet. Use a pneumatic nailer with 1-1/4" length
brad nails and secure through the front of the toe kick
into the closet uprights.
Note: Because cover panels extend 3/4" past the closet
upright, the toe kick will terminate into the cover panel.
6