User's Manual

9. Supports Wireless Control
Power on
In power off state, press Power on/off button and hold it for about 3 seconds, until hear a
note, release the button, blue indicator will flash to indicate power on .
Power off
In power on state, press Power on/off and hold it for about 8 seconds, until hear a long “di”
tone, all LED indicators will be off to indicate power off.
Battery charge
In order to recharge the battery inside the BLU-TALK PTT headset connect the proper USB
cable to the wall charger or to a PC USB port.
Pairing with mobile phone, BT adapter/dongle or GPS
①Place the BLU-TALK PTT headset and the mobile phone (BT adapter/dongle or GPS) in
a visible area within 1 meter range.
②Make sure the BLU-TALK PTT headset is in power off state.
③Press and hold Power Button for about 8 seconds, When the Blue LED and the Red LED
alternately flash, release the button; the BLU-TALK PTT headset enters in pairing state.
④By following the mobile phone，BT Adapter/Dongle or GPS navigator instructions, turn on
the Bluetooth® function, search and pair the headset devices.
⑤From the found devices in your mobile phone, select the device named: “BLU-TALK vx.xx”
and try to pair it by entering, if required on mobile phone, the pin code <0000>. Once
paired successful, LED indicator will change from Blue/Red alternately to Blue flashing,
indicating that the BLU-TALK PTT headset has been connected with your mobile phone.
Now it is possible to use the BLU-TALK to answer calls or to enjoy the music from mobile
phone. To pair a second cell phone, BT Adapter/Dongle or GPS device just repeat all steps
above.
Super Priority Pairing
The BLU-TALK PTT headset can handle devices by assigning them the “super priority”
property for overriding all other devices. The super priority device will transmit PTT
commands by SPP profile.
1) One button remote control supported
2) Remote controller also supports firmware upgrade
Operation: