User's Manual

①
②
③
④
⑤
Stop the Pairing Procedure
NOTE
Only one device can be defined as super priority device; the latest super priority paired device
will replace the previous one. Only a mobile phone, DELLKING BT Adapter/Dongle or a GPS
navigator (i.e. the HFP/HSP links) can be assigned as super priority.
To assign the super priority property to a mobile phone or adaptor/dongle, follow the normal
pairing procedure (steps 1 to 4) and press the Primary PTT button before to turn on
Bluetooth® on the device to pair.
Place the BLU-TALK PTT headset and the mobile phone (BT adapter/dongle or GPS) in
a visible area within 1 meter range.
Make sure the BLU-TALK PTT headset is in power off state.
Press and hold Power Button for about 8 seconds, when the Blue LED and the Red LED
alternately flash, release the button; the BLU-TALK PTT headset enters in pairing state.
If you want to assign to the phone, DELLKING BT Adapter/Dongle, Radio Phone or GPS
the super priority property, just short press the PTT (Primary PTT button) once at this time,
then the LED indicator flash pattern will be changed to red two times and blue two times
quick flashing. Super priority pairing is ready.
By following the mobile phone or GPS navigator instructions, turn on the Bluetooth®
function, and search the headset devices.
From the found devices in your mobile phone, select the device named: “BLU-TALK vx.xx”
and try to pair it by entering, if required on mobile phone, the pin code <0000>. Once
paired successful, LED indicator will change from Blue/Red alternately to Blue flashing
and a “di” tone indicates that the BLU-TALK PTT headset has been connected with your
mobile phone.
To stop an initiated pairing procedure there are two possibilities:
• Wait until the pairing procedure automatically timeouts
• Switch off the BLU-TALK PTT headset by long pressing the Power on/off Button.
• USB charge to reset the headset
NOTE
If the connection with a previously paired device doesn’t take effect, it can be due to several
reasons, including a breakdown of the Bluetooth® function on the device to be connected. To
solve this issue, there are several actions to apply:
• Switch off and on the BLU-TALK PTT headset
• Switch off and on the Bluetooth® on the device to be connected
• Repeat the pairing procedure
• Clear all pairing list on the device to be connected and repeat the pairing procedure
-6-
⑥