Product Brochure

Bell-System Pliers Selection Chart

Bell-System Designation Cat. No. Bell-System Designation Cat. No. Bell-System Designation Cat. No.

Type B Long-Nose D301-6 Diagonal B V-Notch D528V C Pressing D234-6

List 1 Long-Nose 71980 Diagonal D-6 72192 C Pressing VDV026-049

Type B Short-Nose D2291 8" B Sidecut D213-8NE

Diagonal B-5 D245-5 9" B Sidecut D213-9NE

D528V

Cat. No. Overall Length Jaw Length Jaw Width Jaw Thickness Cutting Knives Handle Finish Handle Color Weight

D528V 5-13/16" (147.6 mm) 13/16" (20.6 mm) 9/16" (14.3 mm) 3/8" (9.5 mm) Standard Plastic-Dipped Red 3.2 oz. (91 g)

72192

Cat. No. Overall Length Jaw Length Jaw Width Jaw Thickness Cutting Knives Handle Finish Handle Color Weight

72192 6-1/8" (155.6 mm) 13/16" (20.6 mm) 3/4" (19.1 mm) 7/16" (11.1 mm) Standard Plastic-Dipped Red 5.3 oz. (150 g)

Connector

Crimping Pliers

•

Crimps UR/UY/UG insulation displacement connectors (IDC) - Scotchlok

type connectors

•

Curved handles for greater control

•

Induction-hardened side-cutting knives for long life

Cat. No. Overall Length Jaw Length Jaw Width Jaw Thickness Knife Length Handle Finish Handle Color Weight

D234-6 5-13/16" (147.6 mm) 1-3/32" (27.8 mm) 11/16" (17.5 mm) 3/8" (9.5 mm) 1/2" (12.7 mm) Plastic Dipped Yellow 4.0 oz. (113 g)

D234-6C 5-13/16" (147.6 mm) 1-3/32" (27.8 mm) 11/16" (17.5 mm) 3/8" (9.5 mm) 1/2" (12.7 mm) Plastic Dipped Yellow 4.0 oz. (113 g)

*Spring-loaded action for self-opening. Scotchlok

is a registered trademark of 3M.

D234-6

UY IDCUG IDCUR IDC

Diagonal Bell-System Pliers - "W" & "V" Notches

•

"W" notches to cleanly slit insulation

•

"V" notch at the hinge for quick insulation crushing

•

Tapered nose for easy working in confined areas and close tip cutting

Diagonal Telephone Work Pliers - Type D-6 - "V" Notches

•

Tapered nose for easy working in confined areas and close tip cutting

•

Convenient 0.030" and 0.045" stripping holes

•

"V" stripping notch in jaw for quick insulation slitting

•

Serrated behind the hinge to crush insulation

Telecom Tools

See page 310 for additional information on warnings.