Buying Guide

D259-4C D209-5CD295-4C
Lightweight Flush Cutter
•
Shears wire up to 18 AWG producing a flat, flush cut
•
Shear cutting greatly reduces cutting effort and minimizes fly-off
•
Cushioned grips and steel return spring for increased comfort during repetitive cutting
•
Ultra slim profile increases access in confined areas
•
Heat treated for increased durability
Cat. No. Overall Length Cutting Knives Handle Finish Handle Color Weight
D275-5 5" (127.0 mm) Flush Plastic Red 1.8 oz. (51 g)
D275-5
D244-5C
Midget Diagonal-Cutting Pliers
Additional Features:
•
Sharp pointed nose for precise tip cutting
•
Tapered nose for easy working in confined areas and close tip cutting
(Cat No. D295-4C, D257-4 & D257-4C)
•
Spring loaded for self-opening action (Not available on Cat. No. D257-4)
•
Narrow jaw and hinge for delicate work in tight areas (Cat. No. D259-4C & D2445C)
•
Miniature jaw for close-quarter work with maximum visibility (Cat. No. D295-4C)
D257-4C
Cat. No. Nose
Type
Jaw
Type
Overall
Length
Jaw
Length
Jaw
Width
Jaw
Thickness
Cutting
Knives
Handle
Finish
Handle
Color
Weight
D209-4C Pointed Standard 4-1/4" (108.0 mm) 1/2" (12.7 mm) 7/16" (11.1 mm) 1/4" (6.4 mm) Semi-Flush Plastic-Dipped Royal Blue 2.1 oz. (60 g)
D209-5C Pointed Standard 5-1/16" (128.6 mm) 11/16" (17.5 mm) 9/16" (14.3 mm) 3/8" (9.5 mm) Semi-Flush Plastic-Dipped Royal Blue 3.0 oz. (85 g)
D244-5C Pointed Narrow 5-1/16" (128.6 mm) 11/16" (17.5 mm) 1/2" (12.7 mm) 5/16" (7.9 mm) Flush Plastic-Dipped Royal Blue 2.9 oz. (82 g)
D257-4 Tapered Standard 4-1/4" (108.0 mm) 1/2" (12.7 mm) 7/16" (11.1 mm) 1/4" (6.4 mm) Semi-Flush Plastic-Dipped Royal Blue 1.9 oz. (54 g)
D257-4C Tapered Standard 4-1/4" (108.0 mm) 1/2" (12.7 mm) 7/16" (11.1 mm) 1/4" (6.4 mm) Semi-Flush Plastic-Dipped Royal Blue 1.9 oz. (54 g)
D259-4C Pointed Extra Narrow 4-1/4" (108.0 mm) 1/2" (12.7 mm) 13/32" (10.3 mm) 1/4" (6.4 mm) Flush Plastic-Dipped Royal Blue 1.9 oz. (54 g)
D295-4C Tapered Mini 4-1/4" (108.0 mm) 1/2" (12.7 mm) 3/8" (9.5 mm) 1/4" (6.4 mm) Flush Plastic-Dipped Royal Blue 1.8 oz. (51 g)
Midget Diagonal-Cutting Pliers - Nickel Ribbon Wire Cutters
Additional Features:
•
Designed to cut nickel ribbon wire
•
Nose tip is only 1/32" (0.8 mm) for precise work in confined areas
•
Cutting knife tip is 3/16" (5 mm) long for precise cutting
•
Spring-loaded action for self-opening
D230-4C
Cat. No. Overall Length Jaw Length Jaw Width Jaw Thickness Cutting Knives Handle Finish Handle Color Weight
D230-4C 4-1/4" (108.0 mm) 1/2" (12.7 mm) 7/16" (11.1 mm) 1/4" (6.4 mm) Semi-Flush Plastic-Dipped Royal Blue 1.9 oz. (54 g)
Diagonal-Cutting Electronics Pliers
Pliers
See page 310 for additional information on warnings.
14
www.kleintools.com